PC LEXAN™ 123R-111 SABIC EU

224

Unit Price:US$ 1,958 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
50MT
Delivery Terms:
FOB
Port of Loading :
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

For more details, please contact the supplier!

Material Description

Material Properties:Low viscosity｜High temperature resistance
Application Areas:Electronic and electrical components｜Automotive Applications
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
Melt volume flow rate		ISO 1133	21.0 cm3/10min
Shrinkage rate		内部方法	0.50 - 0.70 %
Water absorption rate		ISO 62	0.35 %
Water absorption rate	Water absorption rate		ISO 62	0.15 %
Outdoor applicability		UL 746C	f1

hardness	Test Condition	Test Method	Test Result
ball-indentation hardness		ISO 2039-1	95.0 Mpa

optical performance	Test Method	Test Result
refractive index	ISO 489	1.586
transmissivity	ASTM D1003	88.0 to 90.0 %
Haze ratio	ASTM D1003	< 0.80 %

flammability	Test Method	Test Result
UL flame retardant rating	UL 94	HB
Burning wire flammability index	IEC 60695-2-12	850 °C
UL flame retardant rating	UL 94	HB
Limiting Oxygen Index	ISO 4589-2	25 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile strain		ISO 527-2/50	100 %
bending strength		ISO 178	90.0 Mpa
Taber abraser		内部方法	10.0 mg
Flexural modulus		ISO 178	2300 Mpa
Tensile modulus		ISO 527-2/1	2350 Mpa
tensile strength		ISO 527-2/50	65.0 Mpa
tensile strength	tensile strength		ISO 527-2/50	63.0 Mpa
Tensile strain		ISO 527-2/50	6.0 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179/1eU	无断裂
Impact strength of cantilever beam gap		ISO 180/1A	11 kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1eU	无断裂
Impact strength of cantilever beam gap		ISO 180/1A	65 kJ/m²
Suspended wall beam without notch impact strength		ISO 180/1U	无断裂
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength		ISO 180/1U	无断裂

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		IEC 60093	> 1.0E+15 ohms
relative permittivity		IEC 60250	2.70
relative permittivity	relative permittivity		IEC 60250	2.70
Volume resistivity		IEC 60093	> 1.0E+15 ohms·cm
dielectric strength		IEC 60243-1	17 KV/mm
Dissipation Factor		IEC 60250	1.0E-3
Dissipation Factor	Dissipation Factor		IEC 60250	1.0E-3
relative permittivity		IEC 60250	2.70
Dissipation Factor		IEC 60250	0.010

injection	Test Condition	Test Method	Test Result
Temperature at the rear of the barrel			260 to 280 °C
Temperature in the middle of the barrel			270 to 290 °C
Temperature at the front of the material cylinder			280 to 300 °C
Temperature			80 to 100 °C
Processing (melt) temperature			280 to 300 °C
Spray nozzle temperature			270 to 290 °C
Suggested maximum moisture content			0.020 %
Hopper temperature			60 to 80 °C
drying temperature			120 °C
drying time			2.0 to 4.0 hr

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/Be	133 °C
Heat distortion temperature	Heat distortion temperature		ISO 75-2/Ae	122 °C
vicat		ISO 306/B50	140 °C
Linear coefficient of thermal expansion		ISO 11359-2	7.0E-5 cm/cm/°C
thermal conductivity		ISO 8302	0.20 W/m/K
ball-indentation hardness		IEC 60695-10-2	通过
ball-indentation hardness	ball-indentation hardness		IEC 60695-10-2	通过
RTI Elec		UL 746	130 °C
RTI Imp		UL 746	130 °C
vicat		ISO 306/B120	141 °C
RTI		UL 746	130 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top