impact performance	Test Condition	Test Method	Test Result	Test Unit
23°C		ASTM D256	800	J/m
23°C	23°C		ISO 180/1A	10	kJ/m²
Dart impact	23°C,TotalEnergy	ASTM D3763	79.1	J
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.800mm	UL 94	V-2
UL flame retardant rating	UL flame retardant rating	3.05mm	UL 94	V-0
Burning wire flammability index	1.00mm	IEC 60695-2-12	960	°C
Hot filament ignition temperature	1.00mm	IEC 60695-2-13	850	°C
Extreme Oxygen Index		ISO 4589-2	35	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
--1		ASTM D638	2280	Mpa
--7		ISO 178	2300	Mpa
--8		ISO 178	90.0	Mpa
Yield, 50.0mm span		ASTM D790	101	Mpa
yield		ASTM D638	62.1	Mpa
yield	yield		ISO 527-2/50	63.0	Mpa
crack		ASTM D638	67.6	Mpa
crack	crack		ISO 527-2/50	60.0	Mpa
yield		ASTM D638	6.0	%
yield	yield		ISO 527-2/50	6.0	%
crack		ASTM D638	130	%
crack	crack		ISO 527-2/50	85	%
50.0mm span		ASTM D790	2150	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
0.45MPa, unannealed, 3.20mm		ASTM D648	138	°C
1.8MPa, unannealed, 3.20mm		ASTM D648	127	°C
1.8MPa, unannealed, 100mm span		ISO 75-2/Ae	124	°C
Flow: -40 to 40 ° C		ASTME831	6.8E-05	cm/cm/°C
Flow: 23 to 80 ° C	23to80℃	ISO 11359-2	7E-05	cm/cm/°C
Horizontal: -40 to 40 ° C	Across Flow, -40to40℃	ASTME831	7.4E-05	cm/cm/°C
Horizontal: 23 to 80 ° C	Across Flow, 23to80℃	ISO 11359-2	7E-05	cm/cm/°C
RTI Elec		UL 746	130	°C
RTI Imp		UL 746	120	°C
RTI		UL 746	130	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	300°C/1.2kg	ASTM D1238	14	g/10min
Melt Volume Flow Rate (MVR)	300°C/1.2kg	ISO 1133	13.0	cm3/10min
Shrinkage rate	MD：3.20mm	Internal Method	0.60-0.80	%
Water absorption rate	Saturation,23°C	ISO 62	0.35	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.15	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257	>1.0E+15	ohms
High arc combustion index	HAI	UL 746	PLC 0
High voltage arc tracing rate	HVTR	UL 746	PLC 2
Hot wire ignition	HWI	UL 746	PLC 1
Volume resistivity		ASTM D257	>1.0E+15	ohms·cm
Dielectric strength	3.20mm,inOil	ASTM D149	17	KV/mm
Dielectric constant	50Hz	ASTM D150	2.70
	Dielectric constant	60Hz	ASTM D150	2.70
	Dielectric constant	Dielectric constant	1MHz	ASTM D150	2.70
Dissipation factor	50Hz	ASTM D150	1E-03
	Dissipation factor	60Hz	ASTM D150	1E-03
	Dissipation factor	Dissipation factor	1MHz	ASTM D150	0.010
Arc resistance		ASTM D495	PLC7
Compared to the anti leakage trace index	CTI	UL 746	PLC 3

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top