Material Properties:Thermal stability｜Middle flow｜ General grade UL 94 V0 for general injection molding｜Low viscosity
Application Areas:Electrical applications｜Lighting applications｜Automotive Applications
Color:--
Grade:Food grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Linear coefficient of thermal expansion	-30-+30	TMA	7
Heat Deflection Temperature	1.82MPa	ASTM D-648	132

Basic performance	Test Condition	Test Method	Test Result
Water absorption rate	23，24时间	ASTM D-570	0.15 %

Electrical performance	Test Condition	Test Method	Test Result
Dissipation Factor	60Hz	ASTM D-150	0.0009
volume resistivity	23	ASTM D-257	10 Ω
dielectric constant	60Hz	ASTM D-150	3.2

Physical properties	Test Condition	Test Method	Test Result
shrinkage rate	流动方向	ASTM D-955	0.5-0.7 %

mechanical properties	Test Condition	Test Method	Test Result
bending strength	23	ASTM D-790	93.2 Mpa
Elongation at break	23	GEPJ	220 %
Impact strength of cantilever beam gap	23	ASTM D-256	764 J/m
tensile strength	23	GEPJ	62.8 Mpa
flexural modulus	23	ASTM D-790	2200 Mpa
Rockwell hardness		ASTM D-785	R123

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top