thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	0.45 MPa, 未退火, 3.20 mm	ASTM D648	83.0 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.8 MPa, 未退火, 3.20 mm	ASTM D648	72.0 °C
vicat		ASTM D15255	90.0 °C
Linear coefficient of thermal expansion	流动 : -40 到 40°C	ASTM E831	7.9E-5 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	横向 : -40 到 40°C	ASTM E831	7.9E-5 cm/cm/°C
RTI Elec		UL 746	60.0 °C
RTI Imp		UL 746	60.0 °C
RTI		UL 746	60.0 °C

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	2.3 mm	UL 94	V-0
UL flame retardant rating	UL flame retardant rating	2.5 mm	UL 94	5VB

Impact resistance	Test Condition	Test Method	Test Result
Dart impact	23°C, Total Energy	ASTM D3763	41.0 J

Filling analysis	Test Condition	Test Method	Test Result
melt viscosity	200°C, 1000 sec^-1	ASTM D3835	310 Pa·s

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	230°C/3.8 kg	ASTM D1238	6.8 g/10 min
melt mass-flow rate	melt mass-flow rate	220°C/5.0 kg	ISO 1133	9.0 g/10 min
Melt volume flow rate	220°C/10.0 kg	ISO 1133	37.0 cm3/10min
shrinkage rate	3.20 mm，Flow	内部方法	0.50 - 0.70 %

injection	Test Condition	Test Method	Test Result
drying temperature			80 to 90 °C
drying time			2.0 to 4.0 hr
Suggested maximum moisture content			0.10 %
Suggested injection volume			50 to 70 %
Temperature at the rear of the barrel			170 to 180 °C
Temperature in the middle of the barrel			195 to 205 °C
Temperature at the front of the material cylinder			200 to 215 °C
Spray nozzle temperature			200 to 220 °C
Processing (melt) temperature			200 to 220 °C
mold temperature			50 to 70 °C
Back pressure			0.300 to 0.700 Mpa
screw speed			30 to 60 rpm
Exhaust hole depth			0.038 to 0.051 mm

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTM D638	2410 Mpa
tensile strength	屈服	ASTM D638	42.0 Mpa
tensile strength	tensile strength	断裂	ASTM D638	35.0 Mpa
elongation	屈服	ASTM D638	2.1 %
elongation	elongation	断裂	ASTM D638	11 %
flexural modulus	50.0 mm 跨距	ASTM D790	2720 Mpa
bending strength	屈服, 50.0 mm 跨距	ASTM D790	73.0 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top