Material Properties:Low warpage｜High transparency｜High gloss｜injection molding ｜Good colorability｜Superior rigidity and toughness balance performance｜Good flow processing performance｜Low odor｜Low warpage
Application Areas:Cups｜bottle｜Barrel｜Household daily necessities｜Daily chemical packaging｜Home appliance products｜Thin walled products｜Daily products｜High definition container｜Food containers｜Thin walled forming
Color:--
Grade:Transparent level

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
density		ISO 1183	0.9 g/cm³
melt mass-flow rate		ISO 1133	25 g/10min

optical performance	Test Condition	Test Method	Test Result
Haze ratio		ASTM D-1003	14 %

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate		ISO 1133	25 g/10min

Mechanical properties	Test Method	Test Result
Flexural modulus	ISO 179	1100 MPa
tensile strength	ISO R527	30 MPa
elongation at yield	ISO R527	14 %
Impact strength of cantilever beam gap	ISO 180/1A	8 J/m
Flexural modulus	ISO 178	1050 Mpa
tensile strength	ISO 527	37 Mpa
elongation at yield	ISO 527	13 %
Rockwell hardness	ASTM D-785	80 R scale
Impact strength of cantilever beam gap	ISO 180/1A	8 kJ/m²

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75/B	85 ℃
Heat distortion temperature	Heat distortion temperature		ISO 75/B	83 °C
optical performance		ASTM D-1003	13 %

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top