PC LEXAN™ 4701R GY7C050 SABIC INNOVATIVE US

237

Unit Price:US$ 4,840 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
20.1MT
Delivery Terms:
FOB
Port of Loading :
Guangzhou port, China
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

+86 ********View

For more details, please contact the supplier!

Material Description

Material Properties:High temperature resistance｜transparent
Application Areas:Electronic and electrical components
Color:--
Grade:Injection grade

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
turbidity	2540 μm	ASTM D1003	1.0	%
Refractive index		ASTM D542	1.600
transmissivity	2540 μm	ASTM D1003	85.0	%
impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D1822	577	kJ/m²
Dart impact	23°C	ASTM D3029	149	J
Suspended wall beam without notch impact strength	23°C	ASTM D4812	3200	J/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	Yield, 50.0 mm Span	ASTM D790	97.0	Mpa
Bending modulus	50.0 mm Span	ASTM D790	2330	Mpa
elongation	Break	ASTM D638	78	%
tensile strength	Break	ASTM D638	77.0	Mpa
tensile strength	tensile strength	Yield	ASTM D638	65.0	Mpa
injection	Test Condition	Test Method	Test Result	Test Unit
Exhaust hole depth			0.025 to 0.076	mm
drying temperature			120	°C
drying time			3.0 to 4.0	hr
Suggested maximum moisture content			0.020	%
Suggested injection volume			40 to 60	%
Temperature at the rear of the barrel			325 to 350	°C
Temperature in the middle of the barrel			340 to 360	°C
Temperature at the front of the material cylinder			350 to 370	°C
Spray nozzle temperature			345 to 365	°C
Processing (melt) temperature			350 to 370	°C
Mold temperature			80 to 115	°C
Back pressure			0.300 to 0.700	Mpa
Screw speed			40 to 70	rpm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI		UL 746	130	°C
RTI Imp		UL 746	130	°C
RTI Elec		UL 746	130	°C
thermal conductivity		ASTM C177	0.21	W/m/K
specific heat		ASTM C351	1260	J/kg/°C
Linear coefficient of thermal expansion	-40 to 95°C，Flow	ASTM E831	8.1E-5	cm/cm/°C
Hot deformation temperature	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	148	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	300°C/1.2 kg	ASTM D1238	2.0	g/10 min
Specific volume		ASTM D792	0.830	cm³/g
Water absorption rate	24 hr	ASTM D570	0.19	%
Shrinkage rate	3.20 mm，Flow	Internal Method	0.80 - 1.0	%
melt mass-flow rate	300°C/6.1 kg	ASTM D1238	9.0	g/10 min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	60 Hz	ASTM D150	3.27
Dielectric strength	3.20 mm, in Air	ASTM D149	20	KV/mm
Volume resistivity		ASTM D257	> 2.5E+17	ohms·cm
Dielectric constant	50 kHz	ASTM D150	3.27
Dielectric constant	Dielectric constant	1 MHz	ASTM D150	3.10
Dissipation factor	50 Hz	ASTM D150	1.6E-3
Dissipation factor	Dissipation factor	60 Hz	ASTM D150	1.6E-3
High arc combustion index		UL 746	PLC 3
High voltage arc tracing rate		UL 746	PLC 3
Hot wire ignition		UL 746	PLC 2
Dissipation factor	100 Hz	ASTM D150	0.026
Arc resistance		ASTM D495	PLC 6
Compared to the anti leakage trace index		UL 746	PLC 3
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	127
Rockwell hardness	Rockwell hardness	M-Scale	ASTM D785	92

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Supplier Join

Get App

Top

PC LEXAN™ 4701R GY7C050 SABIC INNOVATIVE US

Material Description

Technical Data Sheet

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index