PC LEXAN™ EXL9330 WH9E129NS SABIC INNOVATIVE NANSHA
190
- Unit Price:US$ 4,747 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:33MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Flame retardant｜Toughening｜UV resistance
- Application Areas:Casters｜Thin walled products｜food
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.18 g/cm³ | |
| ISO 1183 | 1.19 g/cm³ | ||
| melt mass-flow rate | ASTM D1238 | 10 g/10 min | |
| Melt volume flow rate | ISO 1133 | 9.00 cm3/10min | |
| Shrinkage rate | 内部方法 | 0.40 - 0.80 % | |
| 内部方法 | 0.40 - 0.80 % | ||
| Water absorption rate | ISO 62 | 0.35 % | |
| ISO 62 | 0.15 % | ||
| Outdoor applicability | UL 746C | f1 |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 90.0 Mpa |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Limiting Oxygen Index | ISO 4589-2 | 35 % | |
| Hot filament ignition temperature | IEC 60695-2-13 | 825 °C | |
| Burning wire flammability index | IEC 60695-2-12 | 960 °C | |
| UL flame retardant rating | UL 94 | 5VA | |
| UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | ISO 527-2/50 | 130 % | |
| bending strength | ASTM D790 | 88.0 Mpa | |
| ISO 178 | 85.0 Mpa | ||
| Flexural modulus | ISO 178 | 2200 Mpa | |
| ASTM D790 | 2060 Mpa | ||
| tensile strength | ISO 527-2/50 | 60.0 Mpa | |
| elongation | ASTM D638 | 6.0 % | |
| ISO 527-2/50 | 6.0 % | ||
| ASTM D638 | 130 % | ||
| Tensile modulus | ASTM D638 | 2100 Mpa | |
| ISO 527-2/1 | 2100 Mpa | ||
| tensile strength | ASTM D638 | 58.0 Mpa | |
| ISO 527-2/50 | 55.0 Mpa | ||
| ASTM D638 | 61.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ISO 180/1U | 无断裂 | |
| Dart impact | ASTM D3763 | 52.0 J | |
| Suspended wall beam without notch impact strength | ISO 180/1U | 无断裂 | |
| Impact strength of cantilever beam gap | ISO 180/4A | 80 kJ/m² | |
| ASTM D256 | 800 J/m | ||
| ISO 180/1A | 55 kJ/m² | ||
| ISO 180/4A | 65 kJ/m² | ||
| ISO 180/1A | 70 kJ/m² | ||
| 内部方法 | 1100 J/m | ||
| ASTM D256 | 640 J/m | ||
| ASTM D256 | 680 J/m | ||
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| Impact strength of cantilever beam gap | ASTM D256 | 590 J/m | |
| Charpy Notched Impact Strength | ISO 179/1eA | 75 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| Charpy Notched Impact Strength | ISO 179/1eA | 60 kJ/m² |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suggested maximum moisture content | 0.020 % | ||
| drying time | 3.0 to 4.0 hr | ||
| drying temperature | 120 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| Spray nozzle temperature | 290 to 310 °C | ||
| Processing (melt) temperature | 295 to 315 °C | ||
| Temperature | 70 to 95 °C | ||
| Temperature in the middle of the barrel | 280 to 305 °C | ||
| Temperature at the front of the material cylinder | 295 to 315 °C | ||
| Temperature at the rear of the barrel | 215 to 295 °C | ||
| Suggested injection volume | 40 to 60 % | ||
| Exhaust hole depth | 0.025 to 0.076 mm | ||
| screw speed | 40 to 70 rpm |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| High arc combustion index (HAI) | UL 746 | PLC 0 | |
| Hot wire ignition (HWI) | UL 746 | PLC 1 | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 3 | |
| UL 746 | PLC 3 | ||
| Dissipation Factor | IEC 60250 | 1.0E-3 | |
| IEC 60250 | 1.0E-3 | ||
| ASTM D150 | 8.5E-3 | ||
| ASTM D150 | 2.4E-3 | ||
| ASTM D150 | 2.4E-3 | ||
| dielectric constant | IEC 60250 | 2.70 | |
| IEC 60250 | 2.60 | ||
| IEC 60250 | 2.60 | ||
| ASTM D150 | 2.90 | ||
| ASTM D150 | 2.95 | ||
| dielectric strength | IEC 60243-1 | 16 KV/mm | |
| dielectric constant | ASTM D150 | 2.95 | |
| dielectric strength | ASTM D149 | 17 KV/mm | |
| Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm | |
| Surface Resistivity | IEC 60093 | > 1.0E+15 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| RTI | UL 746 | 120 °C | |
| RTI Imp | UL 746 | 115 °C | |
| RTI Elec | UL 746 | 125 °C | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 7.7E-5 cm/cm/°C | |
| ASTM E831 | 6.7E-5 cm/cm/°C | ||
| ISO 11359-2 | 7.2E-5 cm/cm/°C | ||
| ball-indentation hardness | IEC 60695-10-2 | 通过 | |
| Linear coefficient of thermal expansion | ASTM E831 | 6.7E-5 cm/cm/°C | |
| Heat distortion temperature | ISO 75-2/Ae | 124 °C | |
| vicat | ASTM D152512 | 142 °C | |
| ISO 306/B50 | 140 °C | ||
| Heat distortion temperature | ASTM D648 | 124 °C | |
| ASTM D648 | 120 °C | ||
| ISO 75-2/Be | 135 °C | ||
| ASTM D648 | 134 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top