PA66

PA66 Zytel® HTN52G45HSL DUPONT USA

147

Unit Price:US$ 6,904 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
33MT
Delivery Terms:
FOB
Port of Loading :
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

For more details, please contact the supplier!

Material Description

Material Properties:Dimensional stability｜Low water absorption｜Heat aging｜high strength｜High rigidity
Application Areas:household electrical appliances｜Automotive interior parts｜electrical equipment
Color:--
Grade:Injection grade

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	48 kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	45 kJ/m²

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	V-0
Burning wire flammability index	0.40 mm	IEC 60695-2-12	960 °C
	Burning wire flammability index	0.75 mm	IEC 60695-2-12	960 °C
		Burning wire flammability index	1.5 mm	IEC 60695-2-12	960 °C
		Burning wire flammability index	Burning wire flammability index	3.0 mm	IEC 60695-2-12	960 °C
Hot filament ignition temperature	0.40 mm	IEC 60695-2-13	700 °C
	Hot filament ignition temperature	0.75 mm	IEC 60695-2-13	750 °C
		Hot filament ignition temperature	1.5 mm	IEC 60695-2-13	750 °C
		Hot filament ignition temperature	Hot filament ignition temperature	3.0 mm	IEC 60695-2-13	800 °C

mechanical properties	Test Condition	Test Method	Test Result
bending strength		ISO 178	249 Mpa
Bending modulus		ISO 178	15100 Mpa
Tensile strain	Break	ISO 527-2	1.7 %
tensile strength	Break	ISO 527-2	167 Mpa
Tensile modulus		ISO 527-2	15500 Mpa

injection	Test Condition	Test Method	Test Result
drying temperature			100 °C
Drying time - hot air dryer			6.0 to 8.0 hr
Suggested maximum moisture content			0.10 %
Processing (melt) temperature			320 to 325 °C
Mold temperature			90 to 130 °C
Mold temperature	Mold temperature	Drying Recommended		yes

thermal performance	Test Condition	Test Method	Test Result
RTI Elec	3.0 mm	UL 746	140 °C
	RTI Elec	1.5 mm	UL 746	140 °C
		RTI Elec	0.75 mm	UL 746	140 °C
		RTI Elec	RTI Elec	0.40 mm	UL 746	140 °C
Linear coefficient of thermal expansion	Across Flow : 55 to 160°C	ISO 11359-2	8.0E-5 cm/cm/°C
	Linear coefficient of thermal expansion	Across Flow : -40 to 23°C	ISO 11359-2	4.3E-5 cm/cm/°C
		Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	5.0E-5 cm/cm/°C
			Linear coefficient of thermal expansion	Flow : 55 to 160°C	ISO 11359-2	1.4E-5 cm/cm/°C
				Linear coefficient of thermal expansion	Flow : -40 to 23°C	ISO 11359-2	1.3E-5 cm/cm/°C
				Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Flow	ISO 11359-2	1.5E-5 cm/cm/°C
Melting temperature		ISO 11357-3	310 °C
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	284 °C

Physical properties	Test Condition	Test Method	Test Result
Shrinkage rate	Flow	ISO 294-4	0.20 %
Shrinkage rate	Shrinkage rate	横向Flow	ISO 294-4	0.60 %

Electrical performance	Test Condition	Test Method	Test Result
Relative permittivity	100 Hz	IEC 62631-2-1	4.70
Dissipation factor	100 Hz	IEC 62631-2-1	6.0E-3
Dissipation factor	Dissipation factor	1 MHz	IEC 62631-2-1	0.012
Compared to the anti leakage trace index		IEC 60112	PLC 0
Relative permittivity	1 MHz	IEC 62631-2-1	4.40
Dielectric strength		IEC 60243-1	40 KV/mm
Volume resistivity		IEC 62631-3-1	> 1.0E+13 ohms·m

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top

PA66 Zytel® HTN52G45HSL DUPONT USA

Material Description

Technical Data Sheet Compare

Technical Data Sheet