Material Properties:Glass fiber reinforced
Application Areas:Home appliance components｜Automotive Applications｜Electronic and electrical components
Color:--
Grade:Injection grade

Technical Data Sheet Compare

other	Test Condition	Test Method	Test Result
characteristic			注射级.15%玻纤

Mechanical properties	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ASTM D256/ISO 179	45 kg·cm/cm(J/M)ft·lb/in
Charpy Notched Impact Strength	Charpy Notched Impact Strength		ASTM D256/ISO 179	30 kg·cm/cm(J/M)ft·lb/in
Impact strength of cantilever beam gap		ASTM D256/ISO 179	40 kg·cm/cm(J/M)ft·lb/in
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D256/ISO 179	35 kg·cm/cm(J/M)ft·lb/in
elongation at break		ASTM D638/ISO 527	3 %
Tensile modulus		ASTM D638/ISO 527	6300 kg/cm²(MPa)[Lb/in²]
tensile strength		ASTM D638/ISO 527	125 kg/cm²(MPa)[Lb/in²]
Flexural modulus		ASTM D790/ISO 178	5600 kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	200 kg/cm²(MPa)[Lb/in²]

Physical properties	Test Condition	Test Method	Test Result
Shrinkage rate		ASTM D955	0.19 %
melt mass-flow rate		ASTM D1238/ISO 1133	- g/10min

Thermal performance	Test Method	Test Result
Heat distortion temperature	ASTM D648/ISO 75	-190 ℃（℉）
melting temperature		213 ℃（℉）
vicat	ASTM D1525/ISO R306	>200 ℃（℉）
Linear coefficient of thermal expansion	ASTM D696/ISO 11359	0.3 mm/mm.℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top