Material Properties:High impact resistance｜ Extra high impact strength
Application Areas:chip｜Food service sector｜Equivalent to PC｜The application of transparent ABS and PC under non high-temperature conditions that can be replaced｜Equivalent to PC｜Can replace transparent ABS and PC in applications under non high temperature conditions.
Color:--
Grade:Injection grade

Material Certification

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	0.45MPa(66PSi)	ASTM D-648	74 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.82MPa(264PSi)	ASTM D-648	65 °C
vicat	1kg负荷	ASTM D-1525	88 °C

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate	275℃,5kg		23 g/10min

Other performance	Test Condition	Test Method	Test Result
intrinsic viscosity			0.73

Physical properties	Test Condition	Test Method	Test Result
Haze ratio		ASTM D-1003	0.4 %
shrinkage rate	3.2mm(0.125in)	ASTM D-955	0.002-0.005 in/in
transmittance		ASTM D-1003	89 %
density		ASTM D-792	1.23 g/cm³

mechanical properties	Test Condition	Test Method	Test Result
Tensile stress	屈服	ASTM D-638	6500/7600 psi
Impact strength of cantilever beam gap	23℃/-40℃	ASTM D-256	NB/1.2 ft-lb/in
Elongation at break		ASTM D-638	5/330 %
flexural modulus		ASTM D-790	2.6×105 psi
Rockwell hardness		ASTM D-785	105 R
tensile strength	屈服	ASTM D-790	9600 psi

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top