Material Properties:copolymer｜Antisolvent｜High impact resistance｜Electrical performance｜wear resistant｜Antichemical｜Middle flow｜Weather resistance｜High toughness｜Hydrolysis resistance
Application Areas:film｜Valve components｜Pipe fittings｜switch｜Laptop case｜packing｜container｜Laboratory equipment｜Electronic field｜Electrical field
Color:--
Grade:Blow molding grade

Technical Data Sheet Compare

physical property	Test Method	Test Result
Apparent density	内部方法	1.30 g/cm³
melt mass-flow rate	ASTM D3159	6.0 g/10min
Water absorption rate	ASTM D570	7E-03 %

hardness	Test Condition	Test Method	Test Result
Shore hardness		ASTM D2240	67

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	V-0
Limiting Oxygen Index		ASTM D2863	30to32 %

Mechanical properties	Test Method	Test Result
tensile strength	ASTM D638	40.0 Mpa
elongation	ASTM D638	300 %
Flexural modulus	ASTM D790	1000 Mpa
compressive strength	ASTM D695	17.0 Mpa

Electrical performance	Test Method	Test Result
Volume resistivity	ASTM D257	1E+17 ohms·cm
dielectric strength	ASTM D149	70 KV/mm
dielectric constant	ASTM D1531	2.50to2.60
Dissipation Factor	ASTM D1531	6E-03
arc resistance	ASTM D495	122 sec

Thermal performance	Test Method	Test Result
melting temperature	ASTM D3418	255to280 °C
Linear coefficient of thermal expansion	ASTM D696	1.3E-04 cm/cm/°C
maximum service temperature	UL 746	155 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top