other	Test Condition	Test Method	Test Result	Test Unit
characteristic			注射和挤出牌号.具有高机械强度.同时具有改良的抗水解性和良好的低温肉韧性.在油、脂和溶剂中的溶涨性极小。
purpose			工程注射制品
machinability	Test Condition	Test Method	Test Result	Test Unit
Mold temperature			20-40	°C
Melt Temperature			220-235	°C
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	100%	ASTM D412/ISO 527	15	Mpa/Psi
Tensile modulus	Tensile modulus	300%	ASTM D412/ISO 527	35	Mpa/Psi
tensile strength		ASTM D412/ISO 527	60	Mpa/Psi
tear strength		ASTM D624/ISO 34	130	n/mm²
Shore hardness		ASTM D2240/ISO 868	96	Shore A
Shore hardness	Shore hardness		ASTM D2240/ISO 868	56	Shore D
Resilience		ASTM D2630/ISO 4662	35	%
Wear and tear loss		ISO 4649	35	mm³
Bending modulus		ASTM D790/ISO 178	150	Mpa/Psi
Permanent compression deformation		ISO 815	45	%
Permanent compression deformation	Permanent compression deformation		ISO 815	30	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 2781/JIS K7311	1200

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top