PC/PET XYLEX™ HX8300HP-1H9A002T SABIC INNOVATIVE US
321
- Unit Price:US$ 3,507 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:62MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Flame retardant｜High heat resistance
- Application Areas:Automotive Applications｜Electronic and electrical accessories
- Color:--
- Grade:--
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 15 g/10 min | |
| Melt volume flow rate | ISO 1133 | 15.0 cm3/10min | |
| Shrinkage rate | 内部方法 | 0.50 - 0.80 % | |
| 内部方法 | 0.40 - 0.60 % | ||
| Water absorption rate | ISO 62 | 0.49 % | |
| ISO 62 | 0.15 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 73 |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| refractive index | ISO 489 | 1.539 | |
| transmissivity | ASTM D1003 | 88.0 % | |
| Haze ratio | ASTM D1003 | < 2.0 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Burning wire flammability index | IEC 60695-2-12 | 750 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 1520 Mpa | |
| ISO 527-2/1 | 1600 Mpa | ||
| tensile strength | ASTM D638 | 47.0 Mpa | |
| ISO 527-2/50 | 55.0 Mpa | ||
| ASTM D638 | 46.0 Mpa | ||
| ISO 527-2/50 | 54.0 Mpa | ||
| elongation | ASTM D638 | 5.0 % | |
| ISO 527-2/50 | 5.0 % | ||
| ASTM D638 | 150 % | ||
| ISO 527-2/50 | > 200 % | ||
| Flexural modulus | ASTM D790 | 1680 Mpa | |
| ISO 178 | 1700 Mpa | ||
| bending strength | ISO 178 | 78.0 Mpa | |
| ASTM D790 | 71.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dart impact | ASTM D3763 | 95.0 J |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | > 1.0E+15 ohms | |
| Volume resistivity | ASTM D257 | > 1.0E+15 ohms·cm | |
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 0 |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 65 to 75 °C | ||
| drying time | 3.0 to 5.0 hr | ||
| Suggested maximum moisture content | 0.020 % | ||
| Suggested injection volume | 40 to 80 % | ||
| Temperature at the rear of the barrel | 240 to 250 °C | ||
| Temperature in the middle of the barrel | 240 to 260 °C | ||
| Temperature at the front of the material cylinder | 245 to 265 °C | ||
| Spray nozzle temperature | 245 to 265 °C | ||
| Processing (melt) temperature | 245 to 265 °C | ||
| Temperature | 45 to 60 °C | ||
| Back pressure | 0.200 to 0.500 Mpa | ||
| screw speed | 20 to 100 rpm | ||
| Exhaust hole depth | 0.013 to 0.020 mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 79.0 °C | |
| ASTM D648 | 75.0 °C | ||
| ISO 75-2/Ae | 80.0 °C | ||
| vicat | ASTM D152510 | 96.0 °C | |
| ISO 306/B50 | 92.0 °C | ||
| ball-indentation hardness | IEC 60695-10-2 | 通过 | |
| Linear coefficient of thermal expansion | ASTM E831 | 1.1E-4 cm/cm/°C | |
| ISO 11359-2 | 9.0E-5 cm/cm/°C | ||
| ASTM E831 | 1.1E-4 cm/cm/°C | ||
| ISO 11359-2 | 1.1E-4 cm/cm/°C | ||
| ISO 11359-2 | 9.0E-5 cm/cm/°C | ||
| thermal conductivity | ISO 8302 | 0.23 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top