Material Properties:high strength｜High impact resistance｜Aging resistance｜High temperature resistance｜Low temperature resistance
Application Areas:film｜Food service sector｜Automotive sector｜Industrial machinery
Color:--
Grade:Injection grade

Technical Data Sheet Compare

other	Test Condition	Test Method	Test Result
characteristic			高品质聚脂类.适用于汽车、机械等高强度要求
purpose			适用于汽车、机械等高强度要求。主要适用于射出、押出、吹出。

Basic performance	Test Condition	Test Method	Test Result
density		DIN 53479	1.21 g/cm³

Mechanical properties	Test Condition	Test Method	Test Result
compression set		DIN 53517	30 %
Tensile modulus		DIN 53504-S2	11 n/mm²
compression set		DIN 53517	45 %
Impact strength of cantilever beam gap		DIN 53453	不破裂 kJ/m²
Tensile modulus		DIN 53504-S2	8 n/mm²
tensile strength		DIN 53504-S2	55 n/mm²
Impact strength of cantilever beam gap		DIN 53453	不破裂 kJ/m²
tear strength		DIN 53515	120 N/mm
tensile strength		DIN 53504-S2	40 n/mm²
Tensile modulus		DIN 53504-S2	22 n/mm²
Shore hardness		DIN 53505	96 shoreA
elongation at break		DIN 53504-S2	550 %
elongation at break	elongation at break		DIN 53504-S2	500 %
Shore hardness		DIN 53505	47 shoreB
Friction loss		DIN 53516	25 mm³
tensile strength		ASTM D412/ISO 527	55 Mpa/Psi
tear strength		ASTM D624/ISO 34	120 n/mm²
Abrasion loss		ISO 4649	25 mm³
compression set		ISO 815	45 %

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792/ISO 2781/JIS K7311	1.21

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top