Material Properties:Chemical resistance｜Anti creep｜Good liquidity｜Good forming performance｜Thermal stability｜wear resistant｜Low viscosity｜Low viscosity｜Mold deposition improvement
Application Areas:Automotive sector｜machine｜Mechanical components｜Industrial components
Color:--
Grade:Injection grade

Material Certification

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	455Kpa	ASTM D648	158 °C
Heat Deflection Temperature	Heat Deflection Temperature	820Kpa	ASTM D648	110 °C
UL flame retardant rating		UL 94	HB

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D1238	27 g/10min
shrinkage rate	平行方向		2.0 %
Water absorption rate		ASTM D570	0.22 %

Electrical performance	Test Condition	Test Method	Test Result
dielectric constant	10	ASTM D150	33 Pf/m
Dielectric loss	10，正切	ASTM D150	0.007
Surface Resistivity		ASTM D257	1×10
volume resistivity		ASTM D257	1×10
dielectric strength		ASTM D149	19 MV/m

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	23℃	ASTM D638	62.3 Mpa
Stretching length	23℃	ASTM D638	50 %
bending strength	23℃	ASTM D790	91.2 Mpa
flexural modulus	23℃	ASTM D790	2.62 GPa
Impact strength of cantilever beam gap	3.2mm	ASTM D256	54 J/m
Rockwell hardness		ASTM D785	80 M

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top