
PC IUPILON™ ML-300 MITSUBISHI ENGINEERING JAPAN
335
- Unit Price:US$ 2,566 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:116.5MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
+86 ********View
For more details, please contact the supplier!
Material Description
- Material Properties:Low viscosity|High impact resistance
- Application Areas:Electronic and electrical components|Fitness equipment
- Color:--
- Grade:Injection grade
Technical Data Sheet
mechanical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
bending strength | ASTM D790/ISO 178 | 80.4-90.2 kg/cm²(MPa)[Lb/in²] | |
Bending modulus | ASTM D790/ISO 178 | 2.3 kg/cm²(MPa)[Lb/in²] | |
Rockwell hardness | ASTM D785 | R122-124 | |
elongation | ASTM D638/ISO 527 | 90-140 % | |
tensile strength | ASTM D638/ISO 527 | 58.8-68.6 kg/cm²(MPa)[Lb/in²] | |
Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 740-1000 kg·cm/cm(J/M)ft·lb/in |
thermal performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 6-7 mm/mm.℃ | |
Combustibility (rate) | UL 94 | - |
Physical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
Water absorption rate | ASTM D570/ISO 62 | 0.23-0.26 % | |
melt mass-flow rate | ASTM D1238/ISO 1133 | - g/10min | |
Shrinkage rate | ASTM D955 | 0.58-0.64 % | |
density | ASTM D792/ISO 1183 | 1.2 |
Electrical performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Dielectric loss | ASTM D150/IEC 60250 | 0.008 | |
Surface resistivity | ASTM D257/IEC 60093 | 10 Ω | |
Volume resistivity | ASTM D257/IEC 60093 | 2.1*10 Ω.cm | |
Dielectric constant | ASTM D150/IEC 60250 | - |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.