thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	1.8 MPa, 未退火, 6.40 mm, 注塑	ASTM D648	225 °C
melting temperature		ASTM D3418	260 °C
Linear coefficient of thermal expansion	流动	ASTM D696	3.0E-5 cm/cm/°C
RTI Elec	0.8 mm	UL 746	65.0 °C
	RTI Elec	1.5 mm	UL 746	65.0 °C
	RTI Elec	RTI Elec	3.0 mm	UL 746	65.0 °C
RTI Imp	0.8 mm	UL 746	65.0 °C
	RTI Imp	1.5 mm	UL 746	65.0 °C
	RTI Imp	RTI Imp	3.0 mm	UL 746	65.0 °C
RTI	0.8 mm	UL 746	65.0 °C
	RTI	1.5 mm	UL 746	65.0 °C
	RTI	RTI	3.0 mm	UL 746	65.0 °C

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	0.8 mm	UL 94	V-0
	UL flame retardant rating	1.5 mm	UL 94	V-0
	UL flame retardant rating	UL flame retardant rating	3.0 mm	UL 94	V-0

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	24 hr, 23°C	ASTM D570	0.70 %

Electrical performance	Test Condition	Test Method	Test Result
volume resistivity	23°C	ASTM D257	1.0E+14 ohms·cm
dielectric strength	23°C, 1.00 mm	ASTM D149	22 KV/mm
dielectric constant	23°C, 1 MHz	ASTM D150	3.00
Compared to the Leakage Tracking Index (CTI)	解决方案 A	IEC 60112	V

injection	Test Condition	Test Method	Test Result
drying temperature			80 to 100 °C
drying time			4.0 to 5.0 hr
Suggested maximum moisture content			0.10 %
Temperature at the rear of the barrel			265 to 275 °C
Temperature in the middle of the barrel			270 to 280 °C
Temperature at the front of the material cylinder			270 to 285 °C
Spray nozzle temperature			270 to 280 °C
Processing (melt) temperature			270 to 290 °C
mold temperature			80 to 110 °C
Back pressure			0.981 to 2.94 Mpa
screw speed			60 to 150 rpm

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	断裂, 23°C, 3.20 mm, 注塑	ASTM D638	123 Mpa
elongation	断裂, 23°C, 3.20 mm, 注塑	ASTM D638	3.0 %
flexural modulus	23°C, 3.20 mm, 注塑	ASTM D790	8340 Mpa
bending strength	23°C, 3.20 mm, 注塑	ASTM D790	196 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top