Material Properties: Good liquidity｜Ordinary use｜Adding lubrication
Application Areas:Suitable for long and thin walled components｜Such as ties｜ etc
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
Oxygen index		ISO 4589	29 %

Basic performance	Test Condition	Test Method	Test Result
Water absorption rate		ISO 62	1.2 %

Mechanical properties	Test Method	Test Result
Charpy Notched Impact Strength	ISO 179/1eA	5/15 kJ/m²
elongation at break	ISO 527-2	20/＞50 %
Impact strength of simply supported beam without notch	ISO 179/1eU	NB/NB kJ/m²
elongation at break	ISO 527-2	85/50 Mpa
Tensile modulus	ISO 527-2	3200/1600 Mpa
Impact strength of cantilever beam gap	ISO 180/1A（93）	5/12 kJ/m²

Electrical performance	Test Method	Test Result
dielectric constant	IEC 250	2.9/3.2
Dielectric loss	IEC 250	0.03/0.08
Volume resistivity	IEC 93	1015/1013 Ω.cm
dielectric strength	IEC 243	27/26 KV/mm
Anti arc track KC	IEC 112	600 V

Thermal performance	Test Method	Test Result
Heat distortion temperature	ISO 75-2	75 °C
Linear coefficient of thermal expansion	ASTM E-831	7 10-5·K-1
melting temperature	ISO 3146-C	260 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top