Material Properties:Glass fiber reinforced｜enhance｜filler｜Glass fiber reinforced material｜30%｜Filler by weight
Application Areas:--
Color:--
Grade:Enhanced level

Technical Data Sheet Compare

other	Test Condition	Test Method	Test Result
characteristic			30%玻璃纤维增强
Color			黑色

processability	Test Condition	Test Method	Test Result
Dry conditions			75-85°C / 2-4h
Temperature			90-110 °C °C
Melt Temperature			270-290 °C °C

Mechanical properties	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256/ISO 179	60/90 kg·cm/cm(J/M)ft·lb/in
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D256/ISO 179	11/18 kg·cm/cm(J/M)ft·lb/in
Tensile modulus		ASTM D638/ISO 527	9900 kg/cm²(MPa)[Lb/in²]
Flexural modulus		ASTM D790/ISO 178	8600 kg·cm/cm(J/M)ft·lb/in
bending strength		ASTM D790/ISO 178	270 kg·cm/cm(J/M)ft·lb/in

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ASTM D257/IEC 60093	1013 Ω
Volume resistivity		ASTM D257/IEC 60093	101⁵ Ω.cm

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792/ISO 1183	1.36
Shrinkage rate		ASTM D955	0.2-0.4 %

Thermal performance	Test Method	Test Result
Heat distortion temperature	ASTM D648/ISO 75	250 ℃（℉）
melting temperature		262 ℃（℉）
vicat	ASTM D1525/ISO R306	255 ℃（℉）

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top