plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us
Home
Plastic Raw Materials
LCP

LCP SUMIKASUPER®  E6007LHF SUMITOMO JAPAN

432
  • Unit Price:US$ 7,613 /MT
  • Packaging Specification:
    25 KG/PKG
  • Packaging Material:
    Paper bag
  • Supply Quantity:
    122MT
  • Delivery Terms:
    FOB
  • Port of Loading :
    China Main Port
  • Accepted Payment Methods:
    T/T
  • Shipping:
    Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View
serv********View
+86 ********View

For more details, please contact the supplier!

Material Description

  • Material Properties:Low warpage｜Good forming performance｜Glass fiber reinforced｜enhance
  • Application Areas:Automotive sector
  • Color:--
  • Grade:Extrusion grade

Material Certification

UL

Technical Data Sheet

otherTest ConditionTest MethodTest Result
purpose电气 电子应用领域 连接器 线圈骨架
characteristic低翘曲性 耐磨性能良好 低粘度 流动性高 刚性高 耐化学性良好
impact performanceTest ConditionTest MethodTest Result
Suspended wall beam without notch impact strength6.40 mmASTM D256250 J/m
flammabilityTest ConditionTest MethodTest Result
UL flame retardant rating0.30 mmUL 94V-0
Extreme Oxygen IndexISO 527-140 %
Solder resistanceInternal Method300 °C
mechanical propertiesTest ConditionTest MethodTest Result
Elongation at BreakASTM D638/ISO 5275.1 %
Bending modulusASTM D790/ISO 17811800 kg/cm²(MPa)[Lb/in²]
bending strength23°CASTM D790158 Mpa
Bending modulus23°CASTM D79011800 Mpa
elongationBreakASTM D6385.1 %
tensile strengthASTM D638157 Mpa
bending strengthASTM D790/ISO 178158 kg/cm²(MPa)[Lb/in²]
injectionTest ConditionTest MethodTest Result
drying temperature130 °C
drying time4.0 to 24 hr
Temperature at the rear of the barrel280 to 320 °C
Temperature in the middle of the barrel320 to 340 °C
Temperature at the front of the material cylinder340 to 360 °C
Spray nozzle temperature340 to 360 °C
Processing (melt) temperature350 °C
Mold temperature40 to 160 °C
Injection pressure80.0 to 160 Mpa
Injection speed中等偏快
Maintain pressure20.0 to 40.0 Mpa
Back pressure1.00 to 5.00 Mpa
Screw speed50 to 100 rpm
thermal performanceTest ConditionTest MethodTest Result
Linear coefficient of thermal expansionAcross Flow : 150°CInternal Method8.5E-5 cm/cm/°C
Linear coefficient of thermal expansionFlow : 150°CInternal Method2.0E-6 cm/cm/°C
Hot deformation temperatureHDTASTM D648/ISO 75269 ℃（℉）
Hot deformation temperature1.8 MPa, UnannealedASTM D648269 °C
Physical propertiesTest ConditionTest MethodTest Result
Water absorption rateSaturationASTM D5700.020 %
Shrinkage rateFlowInternal Method0.20 %
Shrinkage rate横向FlowInternal Method0.60 %
Water absorption rateASTM D570/ISO 620.020 %
densityASTM D792/ISO 11831.67
Electrical performanceTest ConditionTest MethodTest Result
Compared to the anti leakage trace indexIEC 60112PLC 3
Arc resistanceASTM D495124 sec
Dissipation factor1.00 GHzASTM D1504.0E-3
Dissipation factor1 MHzASTM D1500.026
Dielectric constant1.00 GHzASTM D1503.50
Dielectric constant1 MHzASTM D1503.80
Volume resistivityASTM D2571.0E+15 ohms·cm
hardnessTest ConditionTest MethodTest Result
Rockwell hardnessR-ScaleASTM D785106
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top