Material Properties:High mobility｜Low warpage
Application Areas:Electronic and electrical components｜Automotive components｜Plate
Color:--
Grade:Flame retardant grade

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Dart impact	-30°C, Total Energy	ASTM D3763	35.0	J
Dart impact	Dart impact	23°C, Total Energy	ASTM D3763	56.0	J
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.8 mm	UL 94	V-0
UL flame retardant rating	UL flame retardant rating	1.5 mm	UL 94	5VB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	--2	ASTM D638	4350	Mpa
Tensile modulus	Tensile modulus	--	ISO 527-2/1	4460	Mpa
tensile strength	Yield3	ASTM D638	55.0	Mpa
	tensile strength	Yield	ISO 527-2/5	56.0	Mpa
		tensile strength	Break3	ASTM D638	40.0	Mpa
		tensile strength	tensile strength	Break	ISO 527-2/5	29.0	Mpa
elongation	Yield3	ASTM D638	3.0	%
	elongation	Yield	ISO 527-2/5	3.0	%
		elongation	Break3	ASTM D638	35	%
		elongation	elongation	Break	ISO 527-2/5	25	%
Bending modulus	50.0 mm Span4	ASTM D790	4400	Mpa
Bending modulus	Bending modulus	--5	ISO 178	4510	Mpa
bending strength	--5,6	ISO 178	101	Mpa
bending strength	bending strength	Yield, 50.0 mm Span4	ASTM D790	96.0	Mpa
injection	Test Condition	Test Method	Test Result	Test Unit
drying temperature			80 to 90	°C
drying time			4.0 to 6.0	hr
Suggested maximum moisture content			0.040	%
Temperature at the rear of the barrel			220 to 255	°C
Temperature in the middle of the barrel			230 to 275	°C
Temperature at the front of the material cylinder			255 to 285	°C
Spray nozzle temperature			255 to 285	°C
Processing (melt) temperature			255 to 285	°C
Mold temperature			70 to 95	°C
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8 MPa, Unannealed, 6.40 mm	ASTM D648	90.0	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span8	ISO 75-2/Af	86.0	°C
Vicat softening temperature	--	ASTM D15259	97.0	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	100	°C
Linear coefficient of thermal expansion	Flow : -40 to 40°C	ASTM E831	4.9E-5	cm/cm/°C
	Linear coefficient of thermal expansion	Flow : -40 to 40°C	ISO 11359-2	4.8E-5	cm/cm/°C
		Linear coefficient of thermal expansion	Across Flow : -40 to 40°C	ASTM E831	6.4E-5	cm/cm/°C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow : -40°C	ISO 11359-2	6.3E-5	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	260°C/2.16 kg	ASTM D1238	17	g/10 min
Melt Volume Flow Rate (MVR)	260°C/2.16 kg	ISO 1133	15.0	cm3/10min
Shrinkage rate	Flow	Internal Method	0.33	%
	Shrinkage rate	Flow : 3.20 mm	Internal Method	0.30 - 0.40	%
	Shrinkage rate	Shrinkage rate	Across FlowFlow	Internal Method	0.38	%
Water absorption rate	Saturation, 23°C	ISO 62	0.10	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.030	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top