impact performance	Test Condition	Test Method	Test Result	Test Unit
Suspended wall beam without notch impact strength		ASTM D256	300	J/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	1% Secant	ASTM D638	1000	Mpa
tensile strength	Yield	ASTM D638	27.0	Mpa
tensile strength	tensile strength	Break	ASTM D638	18.0	Mpa
elongation	Break	ASTM D638	> 500	%
Bending modulus		ISO 178	1050	Mpa
bending strength	Compression Molded	ASTM D790	26.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Brittle temperature		ASTM D746	< -75.0	°C
Vicat softening temperature		ASTM D1525	125	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D1505	0.952	g/cm³
melt mass-flow rate	190°C/2.16 kg	ASTM D1238	0.050	g/10 min
	melt mass-flow rate	190°C/21.6 kg	ASTM D1238	10	g/10 min
	melt mass-flow rate	melt mass-flow rate	190°C/5.0 kg	ASTM D1238	0.38	g/10 min
Environmental stress cracking resistance	10% Igepal, F50	ASTM D1693B	720	hr
Environmental stress cracking resistance	Environmental stress cracking resistance	100% Igepal, F50	ASTM D1693B	> 1200	hr
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	Shore D	ASTM D2240	63

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top