Material Properties:Conductive｜Electrostatic discharge protection｜Antistatic｜Oil resistant
Application Areas:Fitness equipment｜Automotive Applications｜Thin walled products
Color:--
Grade:Injection grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature		ISO 75-2/B	152 °C
Heat Deflection Temperature	Heat Deflection Temperature		ISO 75-2/A	91.0 °C
melting temperature		ISO 11357-3	166 °C
Linear coefficient of thermal expansion		ISO 11359-2	1E-04 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion		ISO 11359-2	1.1E-04 cm/cm/°C

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179/1eU	70 kJ/m²

Physical properties	Test Condition	Test Method	Test Result
Melt volume flow rate		ISO 1133	4.00 cm3/10min
shrinkage rate		ISO 294-4	1.9 %
shrinkage rate	shrinkage rate		ISO 294-4	2.1 %

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		IEC 60093	1E+03 ohms
volume resistivity		IEC 60093	5E+02 ohms·cm

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2/1A/1	2700 Mpa
tensile strength		ISO 527-2/1A/50	53.0 Mpa
Tensile strain		ISO 527-2/1A/50	4.7 %
Tensile strain	Tensile strain		ISO 527-2/1A/50	12 %
flexural modulus		ISO 178	2650 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top