plas

PA66 Vydyne®  41H ASCEND USA

239
  • Unit Price:US$ 3,982 /MT
  • Packaging Specification:
    25 KG/PKG
  • Packaging Material:
    Paper bag
  • Supply Quantity:
    33MT
  • Delivery Terms:
    FOB
  • Port of Loading :
    China Main Port
  • Accepted Payment Methods:
    T/T
  • Shipping:
    Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View
serv********View
+86 ********View

For more details, please contact the supplier!

Material Description

  • Material Properties:--
  • Application Areas:--
  • Color:--
  • Grade:Injection grade

Material Certification

UL

Technical Data Sheet

impact performanceTest ConditionTest MethodTest Result
Impact strength of simply supported beam without notch23°CISO 179无断裂
Impact strength of simply supported beam without notch-30°CISO 179无断裂
flammabilityTest ConditionTest MethodTest Result
Burning rate2.00 mmISO 379512 mm/min
Burning rate3.00 mmISO 37957.9 mm/min
UL flame retardant rating0.75 mmUL 94HB
UL flame retardant rating1.5 mmUL 94HB
UL flame retardant rating3.0 mmUL 94HB
Burning wire flammability index0.75 mmIEC 60695-2-12725 °C
Burning wire flammability index1.5 mmIEC 60695-2-12725 °C
Burning wire flammability index3.0 mmIEC 60695-2-12675 °C
Hot filament ignition temperature0.75 mmIEC 60695-2-13750 °C
Hot filament ignition temperature1.5 mmIEC 60695-2-13750 °C
Hot filament ignition temperature3.0 mmIEC 60695-2-13700 °C
mechanical propertiesTest ConditionTest MethodTest Result
bending strength23°CISO 17855.0 Mpa
Bending modulus23°CISO 1781800 Mpa
Tensile strainBreak, 23°CISO 527-253 %
tensile strengthBreak, 23°CISO 527-249.0 Mpa
tensile strengthYield, 23°CISO 527-249.0 Mpa
Tensile modulus23°CISO 527-21790 Mpa
injectionTest ConditionTest MethodTest Result
Processing (melt) temperature285 to 305 °C
Mold temperature65 to 95 °C
drying temperature80 °C
drying time4.0 hr
Suggested maximum material return ratio25 %
Temperature at the rear of the barrel280 to 310 °C
Temperature in the middle of the barrel280 to 310 °C
Temperature at the front of the material cylinder280 to 310 °C
Spray nozzle temperature280 to 310 °C
thermal performanceTest ConditionTest MethodTest Result
RTI3.0 mmUL 746125 °C
RTI1.5 mmUL 746120 °C
RTI0.75 mmUL 746115 °C
RTI Imp3.0 mmUL 74675.0 °C
RTI Imp1.5 mmUL 74675.0 °C
RTI Imp0.75 mmUL 74675.0 °C
RTI Elec3.0 mmUL 746130 °C
RTI Elec1.5 mmUL 746130 °C
RTI Elec0.75 mmUL 746130 °C
Linear coefficient of thermal expansionAcross Flow : 23 to 55°C, 2.00 mmISO 11359-21.2E-4 cm/cm/°C
Linear coefficient of thermal expansionFlow : 23 to 55°C, 2.00 mmISO 11359-21.5E-4 cm/cm/°C
Melting temperatureISO 11357-3262 °C
Hot deformation temperature1.8 MPa, UnannealedISO 75-2/A56.0 °C
Physical propertiesTest ConditionTest MethodTest Result
Shrinkage rateFlow : 2.00 mmISO 294-41.8 %
Shrinkage rate横向Flow : 2.00 mmISO 294-41.6 %
Electrical performanceTest ConditionTest MethodTest Result
Dielectric strength1.00 mmIEC 6024314 KV/mm
Arc resistance3.00 mmASTM D495PLC 2
Compared to the anti leakage trace index3.00 mmIEC 60112PLC 0
Volume resistivity0.750 mmIEC 600931.0E+10 ohms·cm
High arc combustion index0.75 mmUL 746PLC 0
High arc combustion index1.5 mmUL 746PLC 0
High arc combustion index3.0 mmUL 746PLC 0
High voltage arc tracing rateUL 746PLC 2
Hot wire ignition0.75 mmUL 746PLC 4
Hot wire ignition1.5 mmUL 746PLC 4
Hot wire ignition3.0 mmUL 746PLC 3
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.