Material Properties:Easy to demould｜wear resistant｜Easy to form
Application Areas:Plastic bag｜Electrical appliances｜Electronic and Electrical Applications
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
Shrinkage rate		ASTM D955	0.70 - 0.90 %
Shrinkage rate	Shrinkage rate		ASTM D955	0.70 - 0.90 %

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTM D638	53.0 Mpa
elongation		ASTM D638	53 %
Flexural modulus		ASTM D790	2270 Mpa
bending strength		ASTM D790	81.0 Mpa
coefficient of friction		ASTM D3702	0.28
coefficient of friction	coefficient of friction		ASTM D3702	0.17
Wear factor		ASTM D3702	2.0E+7 10^-8 mm³/N·m

Impact resistance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength		ASTM D4812	无断裂

injection	Test Condition	Test Method	Test Result
drying temperature			120 °C
drying time			4.0 hr
Suggested maximum moisture content			0.020 %
Temperature at the rear of the barrel			295 to 305 °C
Temperature in the middle of the barrel			305 to 315 °C
Temperature at the front of the material cylinder			310 to 320 °C
Processing (melt) temperature			300 to 315 °C
Temperature			80 to 110 °C
Back pressure			0.200 to 0.300 Mpa
screw speed			30 to 60 rpm

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	128 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top