mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D638	1295	kg/m²
elongation		ASTM D638	3.4	%
bending strength		ASTM D790	2020	kg/m²
Bending modulus		ASTM D790	90000	kg/m²
Impact strength of cantilever beam gap		ASTM D256	10	kg-cm/cm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa	ASTM D648	200	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa	ASTM D648	210	°C
Network melting temperature	DSC	内部测试方法	225	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density	吸湿率，24hr 灰分	ASTM D792	1.65	g/cm³
Hygroscopicity	24hr	ASTM D570	0.03	%
ash content		内部测试方法	30	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion		ASTM D696	3000000000000000	cm/cm/℃
Volume resistivity		ASTM D257	1000000000000000	Ω.cm
Surface resistivity		ASTM D257	10000000000000	Ω
Insulation cohesion	2.0mm	ASTM D149	20	KC/mm
Dielectric constant	60Hz	ASTM D150	3.5
Dissipation factor	60Hz	ASTM D150	20
Arc resistance		ASTM D495	90	S
hardness	Test Condition	Test Method	Test Result	Test Unit
Hardness (Rockwell R)		ASTM D785	121
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.74mm	UL 94	V-0
	UL flame retardant rating	1.5mm	UL 94	V-0 5VA
	UL flame retardant rating	UL flame retardant rating	3.0mm	UL 94	V-0 5VA

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top