Material Properties:transparent｜High mobility｜wear resistant｜Low temperature resistance
Application Areas:Cable｜Medical equipment
Color:--
Grade:Injection grade

Technical Data Sheet

elastomer	Test Condition	Test Method	Test Result	Test Unit
tensile strength	100%Strain	ASTM D412	12.4	Mpa
	tensile strength	300%Strain	ASTM D412	27.6	Mpa
	tensile strength	tensile strength		ASTM D412	37.2	Mpa
elongation	Break	ASTM D412	460	%
tear strength		ASTM D624	128	kN/m
Permanent compression deformation	23°C,22hr	ASTM D395B	25	%
Permanent compression deformation	Permanent compression deformation	70°C,22hr	ASTM D395B	45	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	Injection	ASTM D412	31.0	Mpa
Bending modulus	Injection	ASTM D790	29.0	Mpa
Taber abraser		ASTM D1044	45.0	mg
Wear resistance		DIN 53516	25	mm³
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Glass transition temperature		Internal Method	-35.0	°C
Vicat softening temperature		ASTM D1525	120	°C
Vicat softening temperature	Vicat softening temperature		Internal Method	100	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190°C/21.6kg	ASTM D1238	<10	g/10min
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA	ASTM D2240	90

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top