PA66 Vydyne® 21SPC ASCEND USA

581

Unit Price:US$ 3,618 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Plastic bag
Supply Quantity:
20MT
Delivery Terms:
FOB
Port of Loading :
Huangpu port, China
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details
Material Comparison:
PA66 Ultramid® A3K BASF SHANGHAI

Transaction Guarantee:

Supplier Information

Dongguan East Asia Plastic Co., Ltd.

+86 1380********View

1925********View

For more details, please contact the supplier!

Material Description

Material Properties:--
Application Areas:--
Color:--
Grade:Injection grade

Material Certification

MSDS

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
density		ISO 1183	1.14 g/cm³
Shrinkage rate		ISO 294-4	1.7 %
Shrinkage rate	Shrinkage rate		ISO 294-4	1.8 %
Water absorption rate		ISO 62	1.2 %
Water absorption rate	Water absorption rate		ISO 62	2.4 %
Outdoor applicability		UL 746C	f2

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	V-2
	UL flame retardant rating		UL 94	V-2
		UL flame retardant rating		UL 94	V-2
		UL flame retardant rating	UL flame retardant rating		UL 94	V-2
Burning wire flammability index		IEC 60695-2-12	960 °C
	Burning wire flammability index		IEC 60695-2-12	960 °C
		Burning wire flammability index		IEC 60695-2-12	960 °C
		Burning wire flammability index	Burning wire flammability index		IEC 60695-2-12	960 °C
Hot filament ignition temperature		IEC 60695-2-13	825 °C
	Hot filament ignition temperature		IEC 60695-2-13	850 °C
		Hot filament ignition temperature		IEC 60695-2-13	850 °C
		Hot filament ignition temperature	Hot filament ignition temperature		IEC 60695-2-13	850 °C
Limiting Oxygen Index		ISO 4589-2	25 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2	3100 Mpa
tensile strength		ISO 527-2	82.0 Mpa
tensile strength	tensile strength		ISO 527-2	55.0 Mpa
Tensile strain		ISO 527-2	5.0 %
Nominal tensile fracture strain		ISO 527-2	25 %
Flexural modulus		ISO 178	2900 Mpa
bending strength		ISO 178	80.0 Mpa
Poisson's ratio		ISO 527	0.40

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179/1eA	5.0 kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength		ISO 179/1eA	6.0 kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO 179/1eU	无断裂
Impact strength of cantilever beam gap		ISO 180	5.0 kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO 180	6.0 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		IEC 60093	1.0E+13 ohms·cm
dielectric strength		IEC 60243	26 KV/mm
arc resistance		ASTM D495	PLC 5
Compared to the Leakage Tracking Index (CTI)		IEC 60112	PLC 0
High arc combustion index (HAI)		UL 746	PLC 1
	High arc combustion index (HAI)		UL 746	PLC 0
		High arc combustion index (HAI)		UL 746	PLC 0
		High arc combustion index (HAI)	High arc combustion index (HAI)		UL 746	PLC 0
High Voltage Arc Traceability Rate (HVTR)		UL 746	PLC 0
Hot wire ignition (HWI)		UL 746	PLC 4
	Hot wire ignition (HWI)		UL 746	PLC 4
		Hot wire ignition (HWI)		UL 746	PLC 3
		Hot wire ignition (HWI)	Hot wire ignition (HWI)		UL 746	PLC 2

injection	Test Condition	Test Method	Test Result
Temperature			65 to 95 °C
Processing (melt) temperature			285 to 300 °C
Spray nozzle temperature			280 to 300 °C
Temperature at the front of the material cylinder			280 to 290 °C
Temperature in the middle of the barrel			270 to 285 °C
Temperature at the rear of the barrel			260 to 280 °C
Suggested maximum material return ratio			50 %
drying time			1.0 to 3.0 hr
drying temperature			< 70 °C

Thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature (HDT)		ISO 75-2/B	200 °C
Hot deformation temperature (HDT)	Hot deformation temperature (HDT)		ISO 75-2/A	70.0 °C
melting temperature		ISO 11357-3	260 °C
		ISO 11359-2	1.0E-4 cm/cm/°C
			ISO 11359-2	1.0E-4 cm/cm/°C
RTI Elec		UL 746	130 °C
	RTI Elec		UL 746	130 °C
		RTI Elec		UL 746	130 °C
		RTI Elec	RTI Elec		UL 746	130 °C
RTI Imp		UL 746	75.0 °C
	RTI Imp		UL 746	75.0 °C
		RTI Imp		UL 746	75.0 °C
		RTI Imp	RTI Imp		UL 746	75.0 °C
RTI		UL 746	75.0 °C
	RTI		UL 746	85.0 °C
		RTI		UL 746	85.0 °C
		RTI	RTI		UL 746	85.0 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Other Prices

Supplier	Unit Price
ASIAPLAS	US$ 4135 /MT

Get App

Top