Material Properties:High impact｜Low warpage｜Dimensional stability｜High toughness｜Weather resistance
Application Areas:Automotive sector｜Charging station｜Electronic and electrical enclosure｜Lighting applications｜Communication equipment｜Wire and cable
Color:--
Grade:Injection grade

Technical Data Sheet Compare

Thermal Properties	Test Condition	Test Method	Test Result
vicat	Rate B/50	ASTM D1525	105 °C
	vicat	Rate B/5	ISO 306	123 °C
	vicat	vicat	Rate B/5	ISO 306	121 °C
RTI Imp		UL 746B	120 °C
RTI Elec		UL 746B	120 °C
RTI Imp		UL 746B	120 °C
Linear coefficient of thermal expansion	-40°C to 4，流动	ASTM E831	88.4 E-6 °C
	Linear coefficient of thermal expansion	-40°C to 4，流动	ISO 11359-2	88.4 E-6 °C
		Linear coefficient of thermal expansion	-40°C to 4，横向	ASTM E831	89.7 E-6 °C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	-40°C to 4，横向	ISO 11359-2	89.7 E-6 °C
Ball indentation temperature	Pass	IEC 60695-10-2	75 °C
Ball indentation temperature	Ball indentation temperature	Pass	IEC 60695-10-2	125 °C

combustibility	Test Condition	Test Method	Test Result
UL fire rating V		UL 94	1.5 mm
UL flame retardant rating	5VA	UL 94	3 mm
Glow wire combustion index (GWFI)	1mm	IEC 60695-2-12	960 passes at

Electrical Property	Test Condition	Test Method	Test Result
Glow wire combustion index (GWFI)	3mm	IEC 60695-2-12	960 passes
Glow wire ignition temperature (GWIT)	1.0mm	IEC 60695-2-13	825
Glow wire ignition temperature (GWIT)	Glow wire ignition temperature (GWIT)	3.0mm	IEC 60695-2-13	725 by VDE
UV exposure, water exposure test, and immersion		UL 746C	F1

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength	V-notch，23℃	ISO 179/1eA	52 kJ/m²
Impact strength of cantilever beam gap	30℃	ASTM D256	110 J/m
	Impact strength of cantilever beam gap	80104，30℃	ISO 180/1A	8 kJ/m²
		Impact strength of cantilever beam gap	23℃	ASTM D256	800 J/m
		Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	80104，23℃	ISO 180/1A	45 kJ/m²
Instrumented dart impact energy -40 ℃ (-40 ℉) total energy		ASTM D3763	50 J
Instrumented dart impact energy 23 ℃ (73 ℉) total energy		ASTM D3763	50 J

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D1238	35 g/10min
Melt volume flow rate		ISO 1133	11 cm³/10 min
shrinkage rate	flow, 3.2	Internal	0.7-1
Water absorption rate	23°C/sat	ISO 62	0.1
Water absorption rate	Water absorption rate	23°C / 50	ISO 62	0.03

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Type I, 50，屈服	ASTM D638	53 Mpa
	tensile strength	50 mm/m，屈服	ISO 527	51 Mpa
		tensile strength	屈服	Internal	48 Mpa
			tensile strength	50 mm/m，断裂	ISO 527	40 Mpa
			tensile strength	tensile strength	Type I, 50，断裂	ASTM D638	43 Mpa
elongation	Type I, 50，屈服	ASTM D638	5
elongation	elongation	50 mm/m，屈服	ISO 527	4
Elongation at break		ASTM D638	250
	Elongation at break	Type I, 50	ASTM D638	50
	Elongation at break	Elongation at break	50 mm/m	ISO 527	42
bending strength	1.3 mm，屈服	ASTM D790	80 Mpa
bending strength	bending strength	2 mm/m，屈服	ISO 178	73 Mpa
flexural modulus	1.3 mm/m	ASTM D790	2200 Mpa
flexural modulus	flexural modulus	2 mm/m	ISO 178	2130 Mpa
Tensile modulus	5 mm/mi	ASTM D638	2200 Mpa
Tensile modulus	Tensile modulus	1 mm/mi	ISO 527	2090 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top