Material Properties:heat-resisting
Application Areas:Automotive sector｜Electrical field｜Electronic field｜Home appliance components｜Application in the automotive field
Color:--
Grade:Injection grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	0.45MPa,未退火,3.20mm	ASTM D648	124 °C
	Heat Deflection Temperature	1.8MPa,未退火,3.20mm	ASTM D648	107 °C
	Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,未退火,6.40mm	ASTM D648	110 °C
Linear coefficient of thermal expansion	MD：-40到40°C	ASTME831	7.2E-05 cm/cm/°C
thermal conductivity		ASTMC177	0.20 W/m/K

Impact resistance	Test Condition	Test Method	Test Result
Dart impact	-30°C,TotalEnergy	ASTM D3763	54.2 J
Dart impact	Dart impact	23°C,TotalEnergy	ASTM D3763	61.0 J

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	260°C/5.0kg	ASTM D1238	9.0 g/10min
shrinkage rate	MD：3.20mm	内部方法	0.50-0.70 %
Water absorption rate	24hr	ASTM D570	0.10 %
Water absorption rate	Water absorption rate	平衡,23°C	ASTM D570	0.40 %

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTM D638	2210 Mpa
tensile strength	屈服	ASTM D638	56.5 Mpa
elongation	屈服	ASTM D638	5.0 %
elongation	elongation	断裂	ASTM D638	150 %
flexural modulus	50.0mm跨距	ASTM D790	2340 Mpa
bending strength	屈服,50.0mm跨距	ASTM D790	86.2 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top