Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	0.45MPa	ASTM D-648	137 °C

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate	---	ASTM D-1238	7 g/10min
Water absorption rate	---	ASTM D-570	0.15 %

Electrical performance	Test Condition	Test Method	Test Result
Dissipation Factor	60Hz	ASTM D-150	0.0009 ---
dielectric constant	60Hz	ASTM D-150	3.01 ---
volume resistivity	---	ASTM D-257	1.0×10 Ω.cm
Dissipation Factor	1MHz	ASTM D-150	0.01 ---
dielectric constant	1MHz	ASTM D-150	2.96 ---

Physical properties	Test Condition	Test Method	Test Result
UL flame retardant rating	---	UL 94	V-0 ---
UL flame retardant rating	UL flame retardant rating	---	UL 94	3.0 mm
shrinkage rate	3.2mm	ASTM D-955	5-7 10
density	---	ASTM D-792	1.21 ---
UL flame retardant rating	---	UL 94	V-2 ---
UL flame retardant rating	UL flame retardant rating	---	UL 94	1.6 mm

mechanical properties	Test Condition	Test Method	Test Result
Rockwell hardness	---	ASTM D-785	118 ---
bending strength	---	ASTM D-790	91 Mpa
Elongation at break	---	ASTM D-638	90 %
tensile strength	断裂点，---	ASTM D-638	56 Mpa
flexural modulus	---	ASTM D-790	3250 Mpa
Impact strength of cantilever beam gap	23℃	ASTM D-256	640 J/m
tensile strength	屈服点，---	ASTM D-638	62 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top