Material Properties:Glass fiber reinforced｜Flame retardant｜standard｜High temperature resistance
Application Areas:Fiber grade
Color:--
Grade:Injection grade

Technical Data Sheet Compare

other	Test Condition	Test Method	Test Result
notes			增强级
characteristic			尺寸精度优良.标准
Color			黑色
purpose			电器

processability	Test Condition	Test Method	Test Result
process temperature			260-280 °C
	process temperature			290-310 °C
		process temperature			310-320 °C
		process temperature	process temperature			280-300 °C
screw speed			40-100 rpm
Temperature			130-150 °C
pressure			40-50 Mpa
	pressure			0 Mpa
	pressure	pressure			80-130 Mpa

Mechanical properties	Test Method	Test Result
Charpy Notched Impact Strength	ASTM D256/ISO 179	4.5 kg·cm/cm(J/M)ft·lb/in
tensile strength	ASTM D638/ISO 527	130 kg/cm²(MPa)[Lb/in²]
Rockwell hardness	ASTM D785	120
Flexural modulus	ASTM D790/ISO 178	183000 kg/cm²(MPa)[Lb/in²]
bending strength	ASTM D790/ISO 178	190 kg/cm²(MPa)[Lb/in²]
elongation at break	ASTM D638/ISO 527	1.1 %

Electrical performance	Test Condition	Test Method	Test Result
dielectric constant		ASTM D150/IEC 60250	5.8

Physical properties	Test Method	Test Result
density	ASTM D792/ISO 1183	1.98
Shrinkage rate	ASTM D955	0.2 %
Water absorption rate	ASTM D570/ISO 62	0.01 %

Thermal performance	Test Condition	Test Method	Test Result
Combustibility (rate)		UL 94	V-0
Heat distortion temperature		ASTM D648/ISO 75	260 ℃（℉）
Heat distortion temperature	Heat distortion temperature		ASTM D648/ISO 75	280 ℃（℉）
melting temperature			270 ℃（℉）
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	2 mm/mm.℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top