PC/PET XYLEX™ XL1339-78211 SABIC INNOVATIVE US

377

Unit Price:US$ 3,260 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
62MT
Delivery Terms:
FOB
Port of Loading :
Guangzhou port, China
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

+86 ********View

For more details, please contact the supplier!

Material Description

Material Properties:High heat resistance
Application Areas:Automotive components｜Electronic and electrical components
Color:--
Grade:Injection grade

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Charpy Notched Impact Strength	23°C	ISO 179/1eA	45	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30°C	ISO 179/1eA	35	kJ/m²
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	无断裂
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C	ISO 180/1U	无断裂
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Taber abraser	1000 Cycles, 1000 g, CS-17 Wheel	ASTM D1044	16.0	mg
Poisson's ratio		ASTM E132	0.40
bending strength	Yield, 50.0 mm Span4	ASTM D790	94.0	Mpa
bending strength	bending strength	--5,6	ISO 178	80.0	Mpa
Bending modulus	--5	ISO 178	2200	Mpa
Bending modulus	Bending modulus	50.0 mm Span4	ASTM D790	2090	Mpa
elongation	Break	ISO 527-2/50	70	%
	elongation	Break3	ASTM D638	110	%
		elongation	Yield	ISO 527-2/50	5.0	%
		elongation	elongation	Yield3	ASTM D638	5.0	%
tensile strength	Break	ISO 527-2/50	40.0	Mpa
	tensile strength	Break3	ASTM D638	49.0	Mpa
		tensile strength	Yield	ISO 527-2/50	55.0	Mpa
		tensile strength	tensile strength	Yield3	ASTM D638	49.0	Mpa
Tensile modulus		ASTM D638	2090	Mpa
injection	Test Condition	Test Method	Test Result	Test Unit
Temperature at the front of the material cylinder			255 to 275	°C
Spray nozzle temperature			255 to 270	°C
Processing (melt) temperature			260 to 275	°C
drying temperature			110	°C
drying time			4.0 to 6.0	hr
Suggested maximum moisture content			0.020	%
Suggested injection volume			50 to 80	%
Temperature at the rear of the barrel			245 to 265	°C
Temperature in the middle of the barrel			250 to 270	°C
Mold temperature			65 to 90	°C
Back pressure			0.300 to 0.700	Mpa
Screw speed			50 to 80	rpm
Exhaust hole depth			0.013 to 0.020	mm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed, 4.00 mm, 100 mm Span	ISO 75-2/Be	125	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 100 mm Span	ISO 75-2/Ae	105	°C
Vicat softening temperature	--	ISO 306/A50	140	°C
	Vicat softening temperature	--	ISO 306/B50	130	°C
	Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	135	°C
Linear coefficient of thermal expansion	Flow : -30 to 30°C	ASTM D696	7.6E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow : -30 to 30°C	ASTM D696	7.9E-5	cm/cm/°C
thermal conductivity		ASTM C177	0.18	W/m/K
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium, 50% RH	ASTM D570	0.20	%
	Water absorption rate	Equilibrium, 23°C	ASTM D570	0.70	%
	Water absorption rate	Water absorption rate	24 hr	ASTM D570	0.10	%
Shrinkage rate	Across FlowFlow	Internal Method	0.50 - 0.80	%
Shrinkage rate	Shrinkage rate	Flow	Internal Method	0.50 - 0.80	%
Melt Volume Flow Rate (MVR)	265°C/1.2 kg	ISO 1133	4.00	cm3/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257	> 1.0E+15	ohms
Volume resistivity		ASTM D257	> 1.0E+14	ohms·cm
Dielectric strength	3.20 mm, in Oil	ASTM D149	17	KV/mm
Dielectric constant	60 Hz	ASTM D150	3.30
	Dielectric constant	50 kHz	ASTM D150	3.30
	Dielectric constant	Dielectric constant	1 MHz	ASTM D150	3.10
Dissipation factor	50 Hz	ASTM D150	2.0E-3
	Dissipation factor	60 Hz	ASTM D150	2.0E-3
	Dissipation factor	Dissipation factor	1 MHz	ASTM D150	0.020

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Other Prices

Supplier	Unit Price
Guangdong Renhong	US$ 2220 /MT
Dongguan Lerui Plastic	US$ 2610 /MT
Dongguan Baishun	US$ 3900 /MT
Dongguan Guangyan	US$ 3900 /MT

Supplier Join

Get App

Top

PC/PET XYLEX™ XL1339-78211 SABIC INNOVATIVE US

Material Description

Technical Data Sheet

Other Prices

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index