Material Properties:low density｜High elasticity｜crystallization｜Good flexibility｜heat-resisting｜Amorphous｜low density｜Amorphous｜High elasticity｜crystallization｜Good flexibility｜High heat resistance
Application Areas:chip｜film｜Automotive sector｜Plastic modification｜adhesive｜chip｜film｜Application in the automotive field｜Plastic modification｜adhesive
Color:--
Grade:--

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
turbidity	2000 μm, Compression Molded	ASTM D-1003	6	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	Shore A	ASTM D-2240	70
Tensile modulus		Internal Method	12	Mpa
tensile strength	Break	Internal Method	12	Mpa
elongation	Break	Internal Method	>800	%
Stretch permanent deformation	150%Strain	Internal Method	12	%
Permanent compression deformation	23℃, 24 hr	Internal Method	20	%
Permanent compression deformation	Permanent compression deformation	70℃, 24 hr	Internal Method	6	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Brittle temperature		ASTM D-746	-28	°C
Glass transition temperature		Internal Method	135	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	230℃/2.16 kg	ASTM D-1238	6	g/10 min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top