Material Properties:Flame retardant｜High mobility｜High impact resistance｜High temperature resistance｜heat-resisting
Application Areas:Electrical field｜Electronic field｜Household appliances｜Household appliances｜Automotive sector
Color:--
Grade:Injection grade

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Instrumented dart impact energy 23 ℃ (73 ℉) total energy		ASTM D3763	61	J
Instrumented dart impact energy -30 ℃ (-22 ℉) peak		ASTM D3763	54	J
Impact strength of cantilever beam gap	23℃	ASTM D256	534	J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	30℃	ASTM D256	160	J/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus	2.6 mm/	ASTM D790	2650	Mpa
bending strength	2.6 mm/，Yield	ASTM D790	102	Mpa
Elongation at Break	Type I, 50	ASTM D638	40
tensile strength	Type I, 50，Yield	ASTM D638	62	Mpa
thermal properties	Test Condition	Test Method	Test Result	Test Unit
thermal conductivity		ASTM C 177	0.2	W/m-°C
Linear coefficient of thermal expansion	-30°C to 3，Across Flow	ASTM E831	72	E-6/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	-30°C to 3，Flow	ASTM E831	72	E-6/°C
RTI Imp		UL 746B	85	°C
RTI Elec		UL 746B	85	°C
RTI Imp		UL 746B	85	°C
Vicat softening temperature	Rate B/50	ASTM D1525	85	°C
combustion performance	Test Condition	Test Method	Test Result	Test Unit
Limiting Oxygen Index (LOI)		ASTM D 2863	32	%
UL fire rating 5VB		UL 94	2.49	mm
UL fire rating V		UL 94	1.5	mm
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	flow, 3.2	ASTM D570	0.4
Shrinkage rate	xflow, 3.2	Internal	0.4-0.6
Shrinkage rate	Shrinkage rate	flow, 3.2	Internal	0.4-0.8
melt mass-flow rate		ASTM D1238	10	g/10min
Water absorption rate	24 hours	ASTM D570	0.1
Electrical Property	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	100000000000000000	ohm-cm
Surface resistivity		ASTM D257	10000000000000000	Ohm
Dielectric constant		ASTM D 150	3
Dielectric constant	Dielectric constant		ASTM D 150	3
Dissipation factor		ASTM D 150	50	E-4
Dissipation factor	Dissipation factor		ASTM D 150	49	E-4
Compared to the Leakage Traceability Index (CTI)		UL 746A	PLC_0
Dielectric strength	in oil, 3.2	ASTM D149	19.5	kV/mm
Arc resistance		ASTM D495	PLC_6
High voltage arc tracing rate		UL 746A	PLC 2
Hot wire ignition (HWI)		UL 746A	PLC_1
High current arc ignition (HAI)		UL 746A	PLC_0
hardness	Test Condition	Test Method	Test Result	Test Unit
Hardness (Rockwell R)		ASTM D785	123	R

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top