optical performance	Test Condition	Test Method	Test Result	Test Unit
transmissivity	2540μm	ASTM D1003	88.0	%
impact performance	Test Condition	Test Method	Test Result	Test Unit
Dart impact	23°C,EnergyatPeakLoad	ASTM D3763	62.1	J
Dart impact	Dart impact	23°C	Internal Method	169	J
Impact strength of cantilever beam gap		ASTM D1822	473	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D638	62.1	Mpa
elongation	Break	ASTM D638	130	%
Bending modulus	50.0mmSpan	ASTM D790	2340	Mpa
bending strength	Yield,50.0mmSpan	ASTM D790	96.5	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTM D648	129	°C
RTI Elec		UL 746	130	°C
RTI Imp		UL 746	125	°C
RTI Str		UL 746	125	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	300°C/1.2kg	ASTM D1238	18	g/10min
Shrinkage rate	MD：3.20mm	Internal Method	0.50-0.70	%
Water absorption rate	24hr	ASTM D570	0.15	%
Outdoor applicability		UL 746C	f1
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Hot wire ignition	HWI	UL 746	PLC 4
Compared to the anti leakage trace index	CTI	UL 746	PLC 2
High arc combustion index	HAI	UL 746	PLC 1
High voltage arc tracing rate	HVTR	UL 746	PLC 2

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top