Material Properties:high strength｜Weather resistance｜UV resistance｜Low viscosity｜Good processability｜High liquidity｜Moderate heat resistance｜Good resilience｜Flame retardant performance
Application Areas:Automotive sector｜Electrical appliances
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Method	Test Result
melt mass-flow rate	ASTM D1238	18 g/10min
Shrinkage rate	ASTM D955	0.40-0.80 %
Water absorption rate	ASTM D570	0.24 %

optical performance	Test Condition	Test Method	Test Result
transmissivity		ASTM D1003	85.0 %

Mechanical properties	Test Method	Test Result
Rockwell hardness	ASTM D785	123
tensile strength	ASTM D638	63.0 Mpa
elongation	ASTM D638	110 %
Flexural modulus	ASTM D790	2350 Mpa
bending strength	ASTM D790	88.0 Mpa
Impact strength of cantilever beam gap	ASTM D256	830 J/m
Dart impact	ASTM D3029	>85.0 J

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		ASTM D257	2.1E+16 ohm·cm
dielectric constant		ASTM D150	2.85

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	152 °C
Heat distortion temperature	Heat distortion temperature		ASTM D648	137 °C
Linear coefficient of thermal expansion		ASTM D696	0.000060-0.000070 cm/cm/℃
UL flame retardant rating		UL 94	V-2

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top