Material Properties:Glass fiber reinforced｜enhance｜Flame retardant｜Easy to process｜ 30% glass fiber reinforced｜Mechanical properties are generally tested at 23 ℃ unless otherwise specified
Application Areas:Laptop case｜Electronic field｜Electrical field
Color:--
Grade:Enhanced level

Material Certification

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
Shrinkage rate		ASTM D-792	0.008 in/in
Shrinkage rate	Shrinkage rate		ASTM D-955	0.003 in/in

processability	Test Condition	Test Method	Test Result
melting temperature			464-500 °C
mold temperature			86-266 °C

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTM D-790	31500 psi
Suspended wall beam without notch impact strength		ASTM D-4812	9.6 ft-lb/in
Impact strength of cantilever beam gap		ASTM D-256	1.17 ft-lb/in
tensile strength		ASTM D-638	20500 psi
elongation at break		ASTM D-638	2.4 %
Flexural modulus		ASTM D-790	1400 Ksi
Flexural modulus	Flexural modulus		ASTM D-638	1740 Ksi

Electrical performance	Test Method	Test Result
Dielectric loss	ASTM D-150	0.014（0.002）
Electrical constants	ASTM D-150	4（4.2）
dielectric strength	ASTM D-149	584 KV/in

Thermal performance	Test Condition	Test Method	Test Result
melting temperature		ASTM D-3418	437 °C
Heat distortion temperature		ASTM D-648	439（419） °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top