Material Properties:Flame retardant｜heat-resisting｜High mobility｜Flame retardant｜environment?protection｜With SGS UL certificate
Application Areas:Electronic field｜Electrical field｜Household appliances
Color:--
Grade:Flame retardant grade

Material Certification

TDS

Technical Data Sheet Compare

physical property	Test Method	Test Result
density	ASTM D792	0.930 g/cm³
melt mass-flow rate	ASTM D1238	8.0 g/10min
Shrinkage rate	ASTM D955	1.5to1.9 %

hardness	Test Condition	Test Method	Test Result
Rockwell hardness		ASTM D785	90

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	V-2
UL flame retardant rating	UL flame retardant rating			130

Mechanical properties	Test Method	Test Result
tensile strength	ASTM D638	29.4 Mpa
elongation	ASTM D638	200 %
Flexural modulus	ASTM D790	1470 Mpa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	69 J/m

injection	Test Condition	Test Method	Test Result
Temperature at the rear of the barrel			170 到 180 °C
Temperature in the middle of the barrel			180 到 200 °C
Temperature at the front of the material cylinder			180 到 200 °C
Spray nozzle temperature			190 到 210 °C
Temperature			40 到 70 °C
Injection Pressure			39.2 到 78.5 Mpa
Back pressure			0.490 到 1.96 Mpa

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	120 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top