Mechanical properties	Test Method	Test Result
Tensile modulus	ASTM D638	3040 Mpa
tensile strength	ASTM D638	51.0 Mpa
elongation	ASTM D638	2.0 %
Flexural modulus	ASTM D790	3330 Mpa
bending strength	ASTM D790	98.0 Mpa

injection	Test Condition	Test Method	Test Result
drying temperature			75 °C
drying time			1.0 to 2.0 hr
Hopper temperature			40 °C
Temperature at the rear of the barrel			195 °C
Temperature in the middle of the barrel			210 to 220 °C
Temperature at the front of the material cylinder			215 °C
Processing (melt) temperature			190 to 230 °C
Temperature			20 to 70 °C

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	95.0 °C
vicat		ASTM D1525	104 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top