thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	HDT	ASTM D648/ISO 75	125 ℃（℉）
vicat		ASTM D1525/ISO R306	139 ℃（℉）
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	0.7 mm/mm.℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	ISO 11359-2	7E-05 cm/cm/°C
RTI Elec	1.5mm	UL 746	125 °C
RTI Imp	1.5mm	UL 746	115 °C
RTI	1.5mm	UL 746	125 °C
Heat Deflection Temperature	0.45MPa,未退火	ISO 75-2/B	137 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,未退火	ISO 75-2/A	128 °C
Linear coefficient of thermal expansion	流动方向	ASTM D-696	7 10-5cm/cm/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	垂直方向	ASTM D-696	7 10-5cm/cm/℃
TEMPERATURE	电学式，厚度1.47mm	UL 746B	125 °C
	TEMPERATURE	冲击式，厚度1.47mm	UL 746B	115 °C
	TEMPERATURE	TEMPERATURE	非冲击式，厚度1.47mm	UL 746B	125 °C
Heat Deflection Temperature	负荷1.813MPa(18.6kgf/cm2)	JIS K-7207	135 °C
vicat		ISO 306/B50	139 °C
Linear coefficient of thermal expansion	MD	ISO 11359-2	7E-05 cm/cm/°C

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	0.44mm	UL 94	V-2

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179	无断裂

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792/ISO 1183	1280
shrinkage rate		ASTM D955	0.4-0.6 %
Water absorption rate		ASTM D570/ISO 62	0.20 %
shrinkage rate	TD:4.00mm	内部方法	0.40-0.60 %
shrinkage rate	shrinkage rate	MD:4.00mm	内部方法	0.40-0.60 %
Water absorption rate	23°C,24hr	ISO 62	0.20 %
transmittance	3mm thick	ASTM D-1003	white %

Electrical performance	Test Condition	Test Method	Test Result
Dissipation Factor	1MHz	IEC 60250	9E-03
Compared to the Leakage Tracking Index (CTI)		IEC 60112	PLC 2
Surface Resistivity		IEC 60093	>1.0E+15 ohms
volume resistivity		IEC 60093	>1.0E+15 ohms·cm
dielectric strength		IEC 60243-1	32 KV/mm
relative permittivity	100Hz	IEC 60250	3.40
relative permittivity	relative permittivity	1MHz	IEC 60250	3.40
Dissipation Factor	100Hz	IEC 60250	1.1E-03

mechanical properties	Test Condition	Test Method	Test Result
Elongation at break		ASTM D638/ISO 527	110 %
Tensile modulus		ASTM D638/ISO 527	2500 kg/cm²(MPa)[Lb/in²]
flexural modulus		ASTM D790/ISO 178	2300 kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	91 kg/cm²(MPa)[Lb/in²]
Tensile modulus		ISO 527-2/1	2600 Mpa
tensile strength	屈服	ISO 527-2/50	60.0 Mpa
tensile strength	tensile strength	断裂	ISO 527-2/50	60.0 Mpa
Tensile strain	屈服	ISO 527-2/50	6.0 %
Tensile strain	Tensile strain	断裂	ISO 527-2/50	110 %
flexural modulus		ISO 178	2400 Mpa
bending strength		ISO 178	95.0 Mpa
flexural modulus		ASTM D-790	2450(25000) Mpa(kgf/cm2)
Elongation at break	断裂点	ASTM D-638	110 %
tensile strength	屈服点	ASTM D-638	63(640) Mpa(kgf/cm2)
tensile strength	tensile strength	断裂点	ASTM D-638	65(660) Mpa(kgf/cm2)
bending strength		ASTM D-790	95(950) Mpa(kgf/cm2)
Impact strength of cantilever beam gap	艾氏、带缺口厚度3.2mm	ASTM D-256	780(80) J/m(kgf·cm/cm)
shrinkage rate	流动方向	ASTM D-955	0.4-0.6 %
shrinkage rate	shrinkage rate	垂直方向	ASTM D-955	0.4-0.6 %
Impact strength of cantilever beam gap	艾氏、带缺口厚度6.4mm	ASTM D-256	110(11) J/m(kgf·cm/cm)

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top