impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch		ISO 179	8.3	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.750mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ISO 527-2	135	Mpa
Tensile strain	Break	ISO 527-2	1.1	%
Bending modulus		ISO 178	19500	Mpa
bending strength		ISO 178	212	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	274	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	1.9E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	ISO 11359-2	2.3E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.95	g/cm³
Shrinkage rate	TD	ISO 294-4	0.60	%
Shrinkage rate	Shrinkage rate	MD	ISO 294-4	0.30	%
Water absorption rate	23°C,24hr	ISO 62	>0.020	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	1E+16	ohms·cm
Dielectric strength	3.00mm	IEC 60243-1	14	KV/mm
Dielectric constant		IEC 60250	4.70
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Sale	ISO 2039-2	101
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Flowability2	1.00mm，Flowability	Internal Method	125	mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top