Material Properties:Hydrolysis resistance｜Chemical resistance｜Low friction coefficient｜antioxidant｜Filler: Glass fiber reinforced material｜25% filler by weight｜25% filler by weight
Application Areas:Electrical applications
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
density		ASTM D792	1.58 g/cm³
density	density		ISO 1183	1.57 g/cm³
melt mass-flow rate		ASTM D1238	6.5 g/10min
Melt volume flow rate		ISO 1133	8.50 cm3/10min
Shrinkage rate		ASTM D955	0.40 %
	Shrinkage rate		ASTM D955	1.0 %
		Shrinkage rate		ISO 294-4	0.80 %
		Shrinkage rate	Shrinkage rate		ISO 294-4	0.40 %
Water absorption rate		ISO 62	0.20 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2/1A/1	8450 Mpa
tensile strength		ASTM D638	138 Mpa
tensile strength	tensile strength		ISO 527-2/1A/5	120 Mpa
Tensile strain		ISO 527-2/1A/5	2.5 %

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179/1eA	8.0 kJ/m²

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	163 °C
Heat distortion temperature	Heat distortion temperature		ISO 75-2/A	160 °C
melting temperature		ISO 11357-3	166 °C
Linear coefficient of thermal expansion		ISO 11359-2	2.7E-05 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion		ISO 11359-2	1.3E-04 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top