Material Properties:High impact resistance｜Middle flow｜Antistatic｜High rigidity｜Food contact level｜Food contact compliance｜Antistatic｜Good liquidity｜High rigidity
Application Areas:Household appliances｜sporting goods
Color:--
Grade:Injection grade

Technical Data Sheet Compare

Basic performance	Test Condition	Test Method	Test Result
density		ISO 1183	0.905 g/cm
melt mass-flow rate		ISO 1133	48 g/10min

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ISO 527-1	27 Mpa
Flexural modulus		ISO 527-1	1350 Mpa
Impact strength of simply supported beam without notch		ISO 179	75 KJ/m
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO 179	No Break KJ/m
Charpy Notched Impact Strength		ISO 179	3.5 KJ/m
	Charpy Notched Impact Strength		ISO 179	5 KJ/m
	Charpy Notched Impact Strength	Charpy Notched Impact Strength		ISO 179	2.5 KJ/m
elongation at yield		ISO 527-1	5 %
elongation		ISO 527-1	40 %
Impact strength of simply supported beam without notch		ISO 179	100 KJ/m
ball-indentation hardness		ISO 2039-1	62 Mpa

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75B-1	90 °C
vicat		ISO 306	151 °C
vicat	vicat		ISO 306	70 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top