Material Properties:Dimensional stability｜Filler: Glass mineral｜65% filler by weight｜65% filler by weight
Application Areas:Electronic and Electrical Applications｜Electrical appliances
Color:--
Grade:Injection grade

Material Certification

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179	17	kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179	7.0	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.72mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Friction coefficient			0.30
shear strength	23°C	JISK7214	60.0	Mpa
bending strength	23°C	ISO 178	210	Mpa
Bending modulus	23°C	ISO 178	19500	Mpa
Tensile strain	Break,23°C	ISO 527-2	0.90	%
tensile strength	Yield,23°C	ISO 527-2	105	Mpa
Taber abraser	1000Cycles	ISO 9352	70.0	mg
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	TD	ISO 11359-2	2.5E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD	ISO 11359-2	1.9E-05	cm/cm/°C
Melting temperature		ISO 11357-3	278	°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	260	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ISO 62	0.020	%
Shrinkage rate	MD:3.00mm4	Internal Method	0.25	%
Shrinkage rate	Shrinkage rate	TD:3.00mm2	Internal Method	0.50	%
density	23°C	ISO 1183	1.99	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	23°C,1MHz	IEC 60250	2E-03
Dielectric constant	23°C,1MHz	IEC 60250	5.30
Dielectric strength		IEC 60243-1	21	KV/mm
Volume resistivity		IEC 60093	1E+16	ohms·cm
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ISO 2039-2	122
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
BarFlowLength	320°C,1.00mm	Internal Method	8.00	CM

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top