Material Properties:transparent｜High mobility｜Impact strength higher than PMMA｜K glue｜There are high requirements for the appearance of the water inlet position
Application Areas:Food service sector｜Suitable for products with thick adhesive positions
Color:--
Grade:Injection grade

Material Certification

Technical Data Sheet Compare

physical property	Test Method	Test Result
Shrinkage rate	ASTM D-955	0.002-0.006 in/in
density	ASTM D-792	1.2 g/cm
Haze ratio	ASTM D-1003	0.3 %
transmittance	ASTM D-1003	91 %

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate			15 g/10min

Mechanical properties	Test Method	Test Result
Tensile stress	ASTM D-638	6900/7400 psi
elongation at break	ASTM D-638	5/300 %
Impact strength of cantilever beam gap	ASTM D-256	1.5/0.7 ft-lb/in
Rockwell hardness	ASTM D-785	103 R
Flexural modulus	ASTM D-790	2.9×105 psi
tensile strength	ASTM D-790	10000 psi

Other performance	Test Condition	Test Method	Test Result
intrinsic viscosity			0.72

Thermal performance	Test Method	Test Result
Heat distortion temperature	ASTM D-648	75 °C
vicat	ASTM D-1525	85 °C
combustibility	UL 94	V-2
Heat distortion temperature	ASTM D-648	65 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top