
PC PANLITE® L-1225T TEIJIN JAPAN
414
- Unit Price:US$ 3,380 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:30MT
- Delivery Terms:FOB
- Port of Loading :Shenzhen Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
+86 ********View
For more details, please contact the supplier!
Material Description
- Material Properties:--
- Application Areas:Thin walled products|Electrical appliances|Labor protection equipment|Disposable tableware|container|Application in the automotive field|Car headlights
- Color:--
- Grade:Transparent level
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| transmissivity | 3000μm | ASTM D1003 | 88.0 | % |
| Refractive index | ASTM D542 | 1.585 | ||
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
| Charpy Notched Impact Strength | ISO 179 | 53 | kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179 | NoBreak | ||
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Hot filament ignition temperature | 3.2mm | IEC 60695-2-13 | 875 | °C |
| 1.5mm | IEC 60695-2-13 | 850 | °C | |
| Burning wire flammability index | 3.2mm | IEC 60695-2-12 | 875 | °C |
| 1.5mm | IEC 60695-2-12 | 825 | °C | |
| UL flame retardant rating | 0.40mm | UL 94 | V-2 | |
| 2.1mm | UL 94 | HB | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | ISO 527-2/1 | 2400 | Mpa | |
| tensile strength | Yield | ISO 527-2/50 | 62.0 | Mpa |
| Tensile strain | Yield | ISO 527-2/50 | 6.0 | % |
| Nominal tensile fracture strain | ISO 527-2/50 | >50 | % | |
| Bending modulus | ISO 178 | 2400 | Mpa | |
| bending strength | ISO 178 | 95.0 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| RTI Str | 1.5mm | UL 746 | 125 | °C |
| RTI Imp | 1.5mm | UL 746 | 115 | °C |
| RTI Elec | 1.5mm | UL 746 | 125 | °C |
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 136 | °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 123 | °C | |
| Vicat softening temperature | ISO 306/B50 | 142 | °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 7E-05 | cm/cm/°C |
| TD | ISO 11359-2 | 7E-05 | cm/cm/°C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.20 | % |
| Shrinkage rate | MD:4.00mm | Internal Method | 0.50-0.70 | % |
| TD:4.00mm | Internal Method | 0.50-0.70 | % | |
| Melt Volume Flow Rate (MVR) | 300°C/1.2kg | ISO 1133 | 25.0 | cm3/10min |
| density | ISO 1183 | 1.20 | g/cm³ | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Compared to the anti leakage trace index | IEC 60112 | PLC 2 | ||
| Dissipation factor | 1MHz | IEC 60250 | 9E-03 | |
| 100Hz | IEC 60250 | 1E-03 | ||
| Relative permittivity | 1MHz | IEC 60250 | 3.00 | |
| 100Hz | IEC 60250 | 3.10 | ||
| Dielectric strength | IEC 60243-1 | 30 | KV/mm | |
| Volume resistivity | IEC 60093 | >1.0E+15 | ohms·cm | |
| Surface resistivity | IEC 60093 | >1.0E+15 | ohms |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.