Material Properties:Dimensional stability｜High impact｜High rigidity｜Filler: Glass fiber reinforced material｜30%｜Filler by weight
Application Areas:Printer components｜Cold water pipe application｜Water heater
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D1238	2.6 g/10min
Shrinkage rate		内部方法	0.20-0.23 %
Shrinkage rate	Shrinkage rate		内部方法	0.25-0.76 %

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	HB

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTM D638	79.3 Mpa
tensile strength	tensile strength		ASTM D638	79.3 Mpa
elongation		ASTM D638	7.7 %
Flexural modulus		ASTM D790	5560 Mpa
bending strength		ASTM D790	130 Mpa

Impact resistance	Test Condition	Test Method	Test Result
Dart impact		ASTM D3763	20.4 J
Dart impact	Dart impact		ASTM D3763	19.1 J

Thermal performance	Test Condition	Test Method	Test Result
vicat		ASTM D15254	162 °C
Linear coefficient of thermal expansion		ASTME831	1.4E-05 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion		ASTME831	7.7E-05 cm/cm/°C
Heat distortion temperature		ASTM D648	155 °C
Heat distortion temperature	Heat distortion temperature		ASTM D648	134 °C
RTI Elec		UL 746	1.50 °C
RTI Imp		UL 746	1.50 °C
RTI Str		UL 746	1.50 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top