Material Properties:Low burr edge｜Chemical resistance｜High rigidity｜high strength｜High hardness
Application Areas:Rear wall components
Color:--
Grade:Injection grade

Technical Data Sheet Compare

Basic performance	Test Condition	Test Method	Test Result
density		ISO 1183	1.65 g/cm³
Shrinkage rate		ISO 294-4	0.40 - 0.60 %
Shrinkage rate	Shrinkage rate		ISO 294-4	0.20 - 0.60 %
Water absorption rate		ISO 62	0.020 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2/1A/1	15500 MPa
tensile strength		ISO 527-2/1A/5	195 MPa
Tensile strain		ISO 527-2/1A/5	1.9 %
Flexural modulus		ISO 178	14800 MPa
bending strength		ISO 178	290 MPa
Impact strength of simply supported beam without notch		ISO 179/1eU	53 kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO 179/1eU	53 kJ/m²

Other performance	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	V-0
UL flame retardant rating	UL flame retardant rating		UL 94	V-0

Thermal performance	Test Method	Test Result
Heat distortion temperature	ISO 75-2/A	270 °C
Glass Transition Temperature	ISO 11357	90.0 °C
melting temperature	ISO 11357	280 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top