Material Properties:heat-resisting｜Flame retardant｜Good impact resistance｜Good liquidity｜Halogen-free
Application Areas:Electrical field｜Electronic field｜Automotive sector
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
melt mass-flow rate		ISO 1133	17 g/10 min
Shrinkage rate		ISO 294-4	0.5-0.7 %
Shrinkage rate	Shrinkage rate		ISO 294-4	0.5-0.7 %

hardness	Test Condition	Test Method	Test Result
density		ASTM D792	1.19 g/cm³

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	V-1 无
	UL flame retardant rating		UL 94	V-0 无
	UL flame retardant rating	UL flame retardant rating		UL 94	5VB 无

Mechanical properties	Test Condition	Test Method	Test Result
Water absorption rate		ISO 62	0.22 %
Tensile modulus		ISO 527-2/1	2350 Mpa
tensile strength		ISO 527-2/50	60 Mpa
elongation at break		ISO 527-2/50	100 %
elongation at break	elongation at break		ISO 527-2/50	50 %
Flexural modulus		ISO 178	2300 Mpa
bending strength		ISO 178	95 Mpa

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		IEC 60093	1000000000000000 ohms

Thermal performance	Test Condition	Test Method	Test Result
tensile strength		ISO 527-2/5	50 Mpa
elongation at yield		ISO 527-2/50	7 %
Heat distortion temperature		ISO 75-2/B	125 °C
Heat distortion temperature	Heat distortion temperature		ISO 75-2/A	112 °C
Linear coefficient of thermal expansion		ASTM D696	0.000070 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion		ASTM D696	0.000070 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top